Catalogs >
ITW Air Management >
Air nozzles and jets

Air nozzles and jets
4Pages

Catalog excerpts

Drastically Reduce Compressed ITW Vortec's blowoff nozzles and jets are designed to reduce compressed air consumption and noise drastically, compared to open jets. To accomplish these impressive air savings, we incorporate the proven Transvector® amplification principle in our nozzle and jet designs. When compressed air enters the nozzle or jet, it fills a chamber with only one exit path - a 0.002" (0.051 mm) annular orifice. As air passes through this orifice, it accelerates to 1000 feet (304.8m) per second, entraining free surrounding air as it exits. The result is airflow volume up to 25 times more than compressed air supplied. Reduce your operating costs significantly with our nozzles and jets. Data based on 100 PSIG operating pressure and $0.30/1000 SCF Lowers operating costs and saves energy Helps meet OSHA noise specifications Meets OSHA dead-end pressure Wide range of styles and thrust Patented design amplifies air Big savings when replacing open copper tube jets

Open the catalog to page 1

Nozzles are an excellent replacement for open copper tubes, flex-line and other nozzles not designed to save air. A full range of styles, with designs compatible to most installations, is available.

Open the catalog to page 2

Jets are round-throated air amplifiers; one end provides a strong airflow while the other creates suction as free air is entrained. Since jets output a more concentrated, targeted volume of air than nozzles, they are ideal for water, solvents or light oil stripping applications Adjustable output flow and thrust deliver precise cleaning, drying, cooling, parts Specifications are at 100 PSIG (6.9 Bar). All jets are brass and can be shimmed (except Model 909) to vary Annual Blowoff Cost Calculation Guide Use these formulas to determine and compare the annual operating cost of your current...

Open the catalog to page 3

Model 1200, Model 1200N and 1200SS Nozzles Model 1201 and Model 1202 Nozzles Model 1203 and Model 1205 Nozzles ITWJ jfib The design of our blow gun makes it comfortable to hold and includes a convenient hang-up hook. Model 9401 has a 1/4" NPT (F) inlet thread and a 1/8" NPT (F) outlet thread. Includes a Model 1200 Adjustable Nozzle.

Open the catalog to page 4