1. Catalogs
  2. ITW Switches
  3. Spectra Low Profile Edge Mount 015 & 017

Spectra Low Profile Edge Mount 015 & 017

Spectra Low Profile Edge Mount 015 & 017

Spectra Low Profile Edge Mount 015 & 017

Product catalog summary
Product Overview: The Spectra Low Profile Edge Mount series, models 015 and 017, are compact switches with a height starting from only 3mm. They offer up to two changeover or ON/OFF contacts and feature front marking with easy-to-operate sliders. The contacts are patented with 1 micron hard gold plating for durability.
Contact Ratings: Non-switching contacts can handle up to 100Vac and 5A. Switching contacts range from 1µV to 100V and 1µA to 10A. Initial contact resistance is typically 10mΩ, and insulation resistance is at least 10,000MΩ at 500 Vdc.
Performance and Durability: The switches are designed to withstand mechanical wear for up to 10,000 operations. They have a dielectric strength of 500Vrms at 50Hz for one minute and a capacitance between open contacts of less than 1pf at 1KHz.
Environmental Specifications: The operating temperature range is from -55˚C to +85˚C. The switches are tested for humidity resistance according to BS 2011 Test Ca for 56 days. Solderability is ensured within 2 seconds at 235˚C, and they can withstand soldering heat up to 260˚C for 10 seconds when mounted on a 1.5mm PCB.
Product Variants: The document lists several configurations, including dual in-line and single in-line options with different contact arrangements such as single pole double throw (s.p.d.t.), single pole single throw (s.p.s.t.), and double pole double throw (d.p.d.t.).
Installation and Usage: The switches are recommended to be post-fitted after PCB cleaning. The document provides a PCB drilling matrix for proper installation.
Disclaimer: The information is subject to change, and performance figures are estimates based on experience. Users are encouraged to contact the company for specific cases.
See more

Catalog excerpts

Spectra Low Profile Edge Mount 015 & 017-1

Spectra Low Profile Edge Mount 015 & 017 From only 3mm high. Up to 2 changeover or ON/OFF contacts. Front marking and easy to operate sliders. Patented 1 micron hard gold plated contacts. Spectra Low Profile Edge Mount

 Open the catalog to page 1
Spectra Low Profile Edge Mount 015 & 017-2

PCB drilling matrix 1mm ø holes pin centres Spectra Low Profile Edge Mount Dual in line (centre common pin) 10.5mm Single in line (centre common pin) 1 x s.p.d.t. SCLS-1-017 (Flush slider) On/Off Contacts Single in line 1 x s.p.s.t. SDLS-1-017 (Flush slider) Principal Electrical and Performance Data at 20˚C 70% R.H. Contact Ratings: Non Switching: 100Vac, 5A. Switching: 1µV to 100V, 1µA to 1, 10A. Initial Contact Resistance: (at 10mV, 10mA max). Typical: 10mΩ. Temperature: Operating range for continuous electrical use and manual operation is restricted to 55˚C to +85˚C for standard products....

 Open the catalog to page 2

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.