Catalogs >
ITW Switches >
801 _801_CX_Series

801 _801_CX_Series
4Pages

Catalog excerpts

The 801 and 801 CX Series two part printed circuit board connector system utilising a 1.27mm (0.05 in.) staggered pitch with 2.54mm (0.1 in.) between rows has been designed to satisfy the latest requirements of Features include: • Low and high frequency contacts. • Low and high power contacts. • 19 mould sizes up to 96 way l.f. and either 53 + 3 or 41 +6 l.f./h.f. • l.f. terminations include solder, p.c. straight and 90°, crimp wire wrapping and surface mount. • h.f. terminations include solder straight and 90° preserved impedance, twisted cable and p.c. straight and • Polarising facilities l.f. 36 position h.f. 36 or 16 positions. • Jacking facilities, including !4 turn locks. • Additional random vibration with superimposed gunfire with low ns interrupt times.

Open the catalog to page 1

TECHNICAL DATA Plug contacts Socket contacts Retention clips Cover cable clamp Cover jackscrews previous plating codes, i.e. Individual Contact (in isolation) Working Voltage sea-level (1013 mbar) Proof voltage sea-level (1013 mbar) Contact resistance (initially) High grade copper alloy High grade copper alloy HIGH POWER AND HIGH FREQUENCY High Power Co-axial Plug (inner) " Plug (outer) High Power Co-axial Socket (inner) Beryllium Copper Beryllium Copper High grade copper alloy Stainless steel or brass nickel plated Glass-filled polycarbonate Glass-filled nylon Stainless steel Hard Acid...

Open the catalog to page 2

Guiding System (See pages 8 to 11) The 801 and 801CX Series of two part p.c. connectors incorporate a wide choice of polarising and guiding facilities. Since their original introduction these facilities have been extended and improved such that currently the following options are available: l.f. and combined l.f./h.f. connectors with polarised guides which can be orientated to any one of six angular positions of 60°. This permits a choice of 36 positions for each connector. Connectors fitted with 72,84 or 96 l.f. contacts have an additional central guide, normally plain but a polarised...

Open the catalog to page 3

ORDER CODES -Centre Guide Type Guide Type Example of relationship McMurdo Part Nos. to BS9525 N0001 Iss 2 Part Nos. 1 Series type: (a) 801 l.f. Hexagonal Guides (BS9525 N0001 Style) (b) 801 CX Combined l.f./h.f. Hexagonal Guides (BS9525 F0027 Style) (c) 801 CX Combined l.f./h.f. Quadrangular Guides (BS9525 F0012 Style) 2 Gender of moulding: M takes male l.f. contacts F takes female l.f. contacts Note: Hexagonal guide styles, all contacts should be the same gender. Quadrangular guide styles, h.f. and high power contacts may be the same or opposite gender. 3 Number of contacts: See page 4 and...

Open the catalog to page 4