Electronic Assembly Equipment Momentum® II HiE & Elite Printing System Momentum II Fresh look and innovative new features for further enhancement in ease of use, yield, quality, productivity, and versatility. Effective and efficient solution for the most challenging printing applications.

Momentum® II HiE & Elite Momentum: Thinking Ahead The MPM Momentum II is designed to meet the ever-growing challenges Repeatable Printing Quality for High Yields Momentum II is designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput demands grow. Numerous patents protect the Momentum, which incorporates tried and true systems and features from other successful MPM printers that were designed prior to Momentum II (and still in...

Innovative Standard and Optional Features RapidClean™ RapidClean is a high speed stencil solvent cleaning innovation that slashes cycle time and improves stencil cleaning performance, especially for fine-pitch. RapidClean reduces 3 wipe strokes to 2 and cuts cycle time by 5 - 6 seconds per print cycle over the standard wiper; and because fewer cleaning cycles are required, RapidClean can save up to $10K USD per annum in paper savings per printer. The MPM EnclosedFlow Print Head delivers uniform aperture filling and superb printing performance especially for fine pitch devices, with tremendous...

NEW Paste Height Monitor The Paste Height Monitor is designed to prevent defects caused by inadequate volumes of paste on the stencil. It combines advanced software and sensor technology to accurately monitor the paste bead for volume consistency. Upper and lower limit roll-height monitoring eliminates insufficient or excess paste volumes. It is a non-contact solution that can automatically add more paste to the stencil as it is needed. NEW Automatic Paste Dispensing System Dispense for standard cartridges or choose the new patent-pending jar dispenser. Paste is released in precise, measured...

Real value can be measured in terms of yields. More good and reliable product with fewer defects. Momentum delivers high yields, and higher profitability through a very low cost of ownership and operational efficiency. AccuCheck Print Capability Verification Accucheck Print Capability Verification allows the printer to measure its own print capability. Users can verify the machine's capability at any time or continuously on their own products. AccuCheck measures the actual print deposit position versus the target pad to determine a measured print offset. It is an inexpensive, reliable method...

BOARD HANDLING Maximum Board Size (X x Y) 609.6 mm x 508 mm (24” x 20”) Staging Mode - Momentum II Elite 457 mm x 508 mm (18” x 20”) A dedicated workholder is required for boards with an Xsize greater than 20" Minimum Board Size (X x Y) 50.8 mm x 50.8 mm (2” x 2”) 6.0 mm (0.24”) without top clamp foils Maximum Board Weight 4.5 kg (10 lbs) Board Edge Clearance 3.0 mm (0.118") Underside Clearance 12.7 mm (0.5") standard Configurable for 25.4 mm (1.0”) Board Hold-Down EdgeLoc II, centernest vacuum Optional: Fixed top clamps, EdgeLoc+ Board Support Methods Magnetic pins Optional: Vacuum side dams,...