Catalogs >
ITW Dynatec >
Vector - Slot Applicator

Vector - Slot Applicator
2Pages

Catalog excerpts

Vector™ - Slot Applicator The Vector™ slot applicator is available in six coating widths ranging from 100mm to 600mm, expandable in 100mm increments, providing extreme accuracy at the point of application. Vector™ Slot Applicator: • Slot applicator shares a common pump base with other applicators including spray, and bead. • Pumps can be configured every 50mm or on custom centers. • Features the Apex™ Series high-speed module with patent pending quick-change Festo® solenoid. • Apex™ Series modules can provide intermittent patterns as low as 4mS of on time. • AC or Servo motor and precision gearbox for accurate speed control of pumps (1to 45 RPM). • Precision hardened steel die plates for long life. • Metering accuracy of up to ±0.5% every 25mm width. • Standard applicator available in widths of 100mm, 200mm, 300mm, 400mm, 500mm, and 600mm. • Vector™ applicator capable of providing an individual metered flow output to each module. • Vector™ pumps can be changed out in less than 5 minutes, minimizing changeover time. • Available in a V-Slot configuration for multiple stripe patterns and very fast cycle speeds. Reliability The Vector™ pump has a proven reliability in providing continuous duty over a long life cycle. Accuracy AC or precision servo motor and gear box provide accurate adhesive delivery rates. Versatility The slot adapter can be easily removed and can be replaced by a spray or metering adapter. Vector™ Platform shown with optional servo motor. The Dynatec Difference... Vector™ Advanced Metering Platform Reliability, accuracy, and versatility are the foundations of the Vector™ Modular Metering Platform. By assuring the metering accuracy of up to ±0.5%, savings across the board will be significant. Common parts across the different platforms of metering, spray, and slot die reduce the number of spare parts and simplify maintenance procedures. Festo® is a registered trademark of Festo AG. Vector™ Quick-Change Metering Pumps 1 2 3

Open the catalog to page 1

Vector™ - Slot Applicator System Specifications: Available Pump Sizes: Operating Temperature 10 to 218°C (50 to 425°F) 0.4 cc/rev 0.9 cc/rev Adhesive Add-on Rates 0.4 to 300cc/min/pump 0.5 cc/rev 1.0 cc/rev Electrical Service Standard 240 VAC 1 Phase 50/60 Hz 0.6 cc/rev 1.7 cc/rev Working Viscosity 500 - 30,000 cps 0.7 cc/rev 3.34 cc/rev Temperature Zones 1 Adhesive, 1 Air Heater 0.8 cc/rev Available Head Sizes: DIM DIM DIM DIM 100mm 4 Pump 200mm 8 Pump 300mm 12 Pump 400mm 16 Pump 500mm 20 Pump 600mm A = 463 + (NUMBER OF PUMPS X 25) B = 83 + (NUMBER OF PUMPS X 25) C = 70 + (NUMBER OF PUMPS...

Open the catalog to page 2