*mydirectindustry

Catalogs
ITW Dynatec
Ultra™ SCS

Ultra™ SCS

Product catalog summary

Overview
Ultra™ SCS is a modular hot melt applicator platform designed for precise adhesive deposition at high line speeds, specifically targeting the disposable hygiene market. It features advanced nozzle technology for consistent adhesive application, enhancing line speed, reducing adhesive consumption, and improving pattern consistency.

Efficiency
The system's patent-pending design facilitates quicker maintenance, reduces plugging, and enhances line efficiency.

Performance
Ultra™ SCS offers the lowest adhesive usage available, providing superior creep performance, improved contraction forces, and softness.

High-Speed Capability
The system supports high-speed operations, capable of processing up to 1,400 pads per minute.

Features

High-speed technology up to 700 meters per minute (mpm).
Rapid change-over (RCO) design for quick maintenance.
Ultra™-stitch and Ultra™-touch nozzles for diverse applications.
Integrated hardened steel elastic strand guides for durability.
Larger adhesive orifices to minimize plugging and downtime.
Optimized module technology for faster response and longer cycle life.
Lowest adhesive usage with total creep strength as low as 1%.

Technical Data

Operating temperature: 25° to 200°C (77° to 392°F).
Viscosity range: 100-30,000 mPas.
Warm-up time: 15 minutes for cold start, 5 minutes for module change.
Wattage manifold varies from 450W to 1600W depending on the port configuration.
Minimum on/off cycle time: 3 ms.
Pneumatic pressure range: 4.5-5.5 bar (65-80 psi).
Supply voltage: 200-240V, 1 phase, 50-60 Hz.
Adhesive pressure range: up to 68 bar (1,000 psi).
Mounting interface: M8-1.25 tapped holes.
Dimensions vary by port configuration, with a consistent height of 146 mm and depth of 235 mm.
Application air pressure range: 0-4 bar (0-60 psi).
Typical air flow per nozzle: 1,020 nl/h to 1,700 nl/h.
Application width per nozzle: 3-25 mm.

Contact Information
ITW Dynatec has locations in the Americas, China, Japan, Europe, Middle East, Africa, and France, with contact details provided for each region.

Catalog excerpts

Ultra™ is a modular hot melt applicator platform, designed for precise adhesive deposition at highest line speeds. The advanced Ultra™ SCS nozzle technology delivers precise adhesive deposition with exceptionally-low variability for elasticized legs, leg cuffs and waist bands resulting in increased line speed, reduced adhesive consumption and better consistency in patterns. Next-level high-speed technology, up to 1,400 pads per minute. Patent-pending design allows quicker maintenance, less plugging and higher line efficiency. With the lowest adhesive use available, providing best creep performance, improved contraction forces and softness.

Open the catalog to page 1

Specifically designed to advance results in the disposable hygiene market, Ultra™ SCS strand coating applicators coat elastic strands with hot melt adhesive with a patent-pending design that provides the industry’s most accurate and efficient adhesive coating. Efficiency is at the heart of the design, which delivers next-level high-speed technology as well as Rapid Change-Over for quick maintenance, integrated hardened steel elastic strand guides for extended lifespan and large adhesive orifices for less plugging and minimal downtime. Ultra™-Stitch and Ultra™-Touch nozzles not only offer a wide...

Open the catalog to page 2

Ultra™ SCS

Ultra™ SCS

Catalog excerpts

All ITW Dynatec catalogs and technical brochures

Archived catalogs