UFD-HS™ Fiberized Spray Applicators UFD-HS™ Series automatic adhesive applicators provide exceptional value and adhesive savings when compared to traditional applicator heads. With ITW Dynatec’s patented Omega™ and Random Fiber™ patterns, UFD-HS™ applicator heads provide up to 50% adhesive savings by using less glue while maintaining, if not improving, bond strength. UFD High Speed™ Fiberized Spray Applicators: • The fastest adhesive applicator in the industry. • Module design positions valve seat directly behind the nozzle for improved performance. • Direct-connect solenoid gives faster valve response and faster cycle times for intermittent applications. • Solenoid can be removed and replaced in a fraction of the time of a tube-mounted solenoid. • LED in solenoid connector for quicker troubleshooting. • Patented Omega™ and Random Fiber™ patterns use less adhesive and maintain or improve bond strength. • Continuous Pattern edge accuracy of± 2 millimeter, depending on the adhesive. Performance New nozzle design has a very short glue channel to orifice for better cut-off and less stringing. Efficiency High-speed solenoid consumes less air than tube-mounted solenoids, and does not require overexcitation for high-speed operation. Simplicity Low-profile air heater allows closer placement of the applicator to the substrate as well as an easier fit to the parent machine. ITW Dynatec - UFD-HS™ Series Applicators Shown with quick-change UFD-HS™ Nozzles featuring patented Omega™ and Random Fiber™ patterns with partial configurations. The Dynatec Difference... Random Fiber Random Fiber Omega Patented Technology Many companies say that they are innovators by providing techniques for laying down fiberized adhesive, but only ITW Dynatec has the patents to prove it (5,902,540 5,882,573 - 5,904,298). ITW Dynatec invented Laminated Plate Technology, which is used in all ITW Dynatec UFD™ nozzles and is the most effective way to lay down fiberized adhesive. This new product spawned many imitators, but none have been able to match the performance provided by ITW Dynatec’s Laminated Plate Technology. When you use UFD™ Fiberized Spray technology from ITW Dynatec, you can be certain that you are using the best product on the market.

UFD-HS™ Series - Automatic Applicators System UFD 050 UFD 050 UFD 075 UFD 100 UFD 150 1 2 3 4 6 --- 25.2 mm 25.2 mm 25.2 mm 25.2 mm 38ºC to 218ºC (100ºF to 425ºF) 38ºC to 218ºC (100ºF to 425ºF) 38ºC to 218ºC (100ºF to 425ºF) 38ºC to 218ºC (100ºF to 425ºF) 38ºC to 218ºC (100ºF to 425ºF) 15 min. (cold start) 5 min. (module change) 15 min. (cold start) 5 min. (module change) 15 min. (cold start) 5 min. (module change) 15 min. (cold start) 5 min. (module change) 15 min. (cold start) 5 min. (module change) 100 to 30,000 cps 100 to 30,000 cps 100 to 30,000 cps 100 to 30,000 cps 100 to 30,000 cps 68...