Catalogs >
ITW Dynatec >
LP Mod-Plus Marathon - Adhesive Applicator

LP Mod-Plus Marathon - Adhesive Applicator
2Pages

Catalog excerpts

LP Mod-Plus Marathon - Adhesive Applicator - 1

The Next Level of Technology LP Mod-Plus Marathon™ - Adhesive Applicator The LP MOD-PLUS MARATHON™ is an air-operated adhesive applicator with an in-line filter cartridge to prevent particulate matter from obstructing adhesive flow through the nozzle orifice. Its tapered body allows for uninterupted flow of cases, making it ideal for case erecting and case sealing applications. The LP Marathon’s™ screw-on nozzle seat also allows for fast and easy nozzle change. LP Mod-Plus Marathon™ Applicator: • Standard in-line filter prevents nozzle clogging. • Platinum sensors provide optimum temperature control. • Standard air open/air close module for accurate bead placement. • Low-Profile design ideal for case erecting and case sealing applications. • Rotating right angle nozzles can be positioned for optimum pattern placement. Reliability Air open/air close design gives clean, sharp cut-off every time. Performance Rotating nozzles offer flexible pattern placement. Simplicity Easy-to-remove module body saves time during module changes. ITW Dynatec - LP Mod-Plus Marathon™ 2-Module Applicator shown with optional right angle nozzles The Dynatec Difference... Air Open/Air Close Design Over time, adhesive applicator modules that use an air open/ spring close system can lose spring tension, resulting in stringing and poor cut-offs. The LP Mod-Plus Marathon™ applicator module is designed to operate as an air open/air close system that does not rely on a spring to close the orifice during operation. The result is both cleaner cut-off and better operation over a longer operating lifespan. While this feature may be optional on competitive modules, only ITW Dynatec offers this feature standard on the LP Mod-Plus Marathon™ adhesive applicator.

Open the catalog to page 1

LP Mod-Plus Marathon - Adhesive Applicator - 2

LP Mod-Plus Marathon™ - Adhesive Applicator System LP Mod-Plus Marathon™ Operating Temperature Range 38°C to 218°C (100°F to 425°F) Minimum Operating Pneumatic Pressure 5 bar (74 psi) Maximum Operating Pneumatic Pressure 9.7 bar (140 psi) Minimum Adhesive Pressure 41 bar (600 psi) Maximum Adhesive Pressure 68 bar (1,000 psi) Minimum Adhesive Viscosity None Maximum Adhesive Viscosity 20,000 cps Maximum On/Off Cycle Speed 5,000 cycles/minute (400 series MAC® valve) * Specifications are based on 1,000 cps adhesive Dimensions LP Mod-Plus Marathon™ Height (H) 270.4 mm (10.65 in) Depth (D) 154.5...

Open the catalog to page 2