Catalogs >
ITW Dynatec >
EVC-1

EVC-1
2Pages

Catalog excerpts

The Next Level of Technology EVC-1 - Adhesive Volume Controller The EVC-1 (Electronic Volume Controller) from ITW Dynatec provides superior technology for varying adhesive volume during parent machine line speed changes. This assures that the correct volume of adhesive is dispensed onto the product, thus saving you valuable adhesive and assuring product integrity. The EVC-1 is compatible with most ITW Dynatec hot melt systems, including gear and piston, and is field upgradable. EVC-1: • Compatible with most new and existing ITW Dynatec equipment. • Smart electronics work with both 120 VAC and 240 VAC power input without changing internal circuitry. • Easy to use controls allow for fine tuning of adhesive output throughout a full range of line speeds. • Smart electronics will accept 0-10vdc or 4-20ma input signals for varying output signal in harmony with parent machine line speed. Reliability Scalable controls accommodate a full range of line speed input/ output. Performance Provides accurate control for adhesive volume output. Simplicity Smart electronics allows for easy installation and set up without changing internal circuitry. ITW Dynatec - EVC-1 Adhesive Volume Controller The Dynatec Difference... Electronic Volume Control With the increase in demanding hot melt adhesive applications today, having accurate control over volumetric output is critical to the integrity of the bond as well as control of adhesive usage. The EVC-1 provides superior technology that allows you to obtain the necessary control for your most difficult applications. The added benefit of the smart electronics gives you ease of installation and set up on most current hot melt adhesive systems offered from ITW Dynatec.

Open the catalog to page 1

EVC-1 Adhesive Volume Controller System Operating Temperature Supply Voltage 4-20 mADC or 0-10 VDC Signal (Selectable) Input Signal Melters Feed Systems Hoses Applicators Nozzles Supply Pressure Output Pressure Related Products Pressure Relief Valve Detail Air Line to EVC-1 Pressure Relief Valve Required when using the EVC-1 *Valve included on Piston Pump ASUs, but line speed tracking kit must be used in conjunction (not available on Dynaminis) *Valve must be added as an option on gear pump ASUs 4/2011 ITW Dynatec ITW Dynatec reserves the right to discontinue or change specifications,...

Open the catalog to page 2