*mydirectindustry

Catalogs
ITW Dynatec
Dynamini™

Dynamini™

Product catalog summary

Overview
The Dynamini™ Hot Melt Adhesive Supply Units are designed for optimal performance, reliability, and simplified daily operation. They offer accurate temperature control, a user-friendly interface, and a melt-on-demand hopper that extends adhesive life.

Performance
The unit provides accurate and proportional temperature control for the hopper, hoses, and applicators, ensuring consistent adhesive application.

Simplicity
An icon-driven control panel simplifies operations, making it easy for users to manage the system.

Reliability
The Melt-On-Demand hopper is a key feature that extends adhesive life and performance by melting only the adhesive required for the application. It comes with a 7-year warranty.

Technical Specifications

Hopper Capacity: 5 kg (10 lbs)
Operating Temperature Range: 40 ° to 218 °C (104 ° to 425 °F)
Viscosity Range: 500 to 50,000 mPas/cps
Melt Rate: 8 kg/h (17.3 lb/h)
Gear Pump Sizes: 1.5, 3.2, 4.5, 10 ccm/rev
Piston Pump Rate: 0.91 kg/min (2 lb/min)
Piston Pump Compression Ratio: 12:1
Max. Working Hydraulic Pressure: 6.8 MPa (1000 psi)
Supply Voltage: 100 to 120 VAC or 200 to 240 VAC, 1 Phase, 50/60 Hz
Dimensions: Height 45 cm, Depth 54 cm, Width 29 cm

Features and Options

Self-diagnostic P.I. digital temperature controller with platinum sensor accuracy
Removable access covers for easy maintenance
Analog pressure gauge
Hose boom and roll cart available

Global Presence
ITW Dynatec has locations in the Americas, China, Japan, Europe, the Middle East, and Africa, providing global support and service.

Catalog excerpts

DYNAMINI™ HOT MELT ADHESIVE SUPPLY UNITS PROVIDE EXCEPTIONAL VALUE IN A SMALL HOT MELT UNIT WHICH HAS BEEN DESIGNED FOR OPTIMAL PERFORMANCE, RELIABILITY AND SIMPLIFIED DAILY OPERATION. Melt-On-Demand hopper extends adhesive life and performance. Icon-driven control panel simplifies operations.

Open the catalog to page 1

DYNAMINI™ ADHESIVE SUPPLY UNIT The Dynamini™ is designed for flexibility and can be used in various configurations depending upon your application. It allows for the use of a variety of bead and spiral spray nozzles that are available for applications that are straight or at a right angle to the trigger. The patented melt-on-demand hopper with 7 year warranty standard, virtually eliminates adhesive degradation by melting only the adhesive required for the application. FEATURES • Melt-on-Demand Hopper Grid extends adhesive life • Analog pressure gauge and performance. • Hose boom • 7 year Melt-on-Demand...

Open the catalog to page 2

Dynamini™

Dynamini™

Catalog excerpts

All ITW Dynatec catalogs and technical brochures

Archived catalogs