Catalogs >
ITW Dynatec >
Dynamelt? GC Series

Dynamelt? GC Series
2Pages

Catalog excerpts

The Next Level of Technology Dynamelt™ GC Series - Adhesive Supply Unit The Dynamelt™ GC Series adhesive supply unit is the largest capacity melter in the ITW Dynatec family, offering maximum adhesive output. Two critical factors in choosing the right ASU for your operation are melt rate and pump rate and ITW Dynatec has maximized both in the GC Series for optimum performance. The GC Series melter can also accommodate a large variety of pump sizes and configurations, offering even greater flexibility. Dynamelt™ GC Series: • Max pump output rate up to 1400 lbs/hr for ultimate performance. • Teflon impregnated anodized hopper. • Built-in safety systems to prevent charring. • Multiple grid rows for superior melt rate. • Multiple temperature control zones. Innovation The latest options in PLC technology including Allen-Bradley ControlLogix® and color touchscreen HMI’s. Precision Load cell type level control system available for maximum accuracy. Performance Built-in back-up safety and alarm systems virtually prevent any charring of adhesives or polymers. Shown - ITW Dynatec Dynamelt™ GC Series Adhesive Supply Unit The Dynatec Difference... High Volume Melt Rate The net output of any adhesive supply unit’s melting capacity is based on two factors - square inches of surface area in conjunction with wattage. ITW Dynatec has the highest number of square inches, in relationship to wattage, of any melter in it’s class - giving you the superior performance you require. In addition, ITW Dynatec’s patented Melt-On-Demand system utilizes vertical, unheated hoppers that only melt the amount of adhesive required by the application. Most of the adhesive in the hopper remains at a much lower temperature, perhaps even solid state. The added benefits of melting only the adhesive required are faster start-ups, lower energy costs and better viscosity control.

Open the catalog to page 1

DynameltTM GC Series - Adhesive Supply Unit System Hopper Capacity Grid Configuration Operating Temperature One Vane Slice Grid Melt Rate (per hour)* Three Vane Slice Grid Allen-Bradley ControlLogix® w/ Panelview 1000+ Color HMI Control Scheme Number of Pumps Available Pump Sizes** Pump Pressure Relief Block Grids Each pump up to 93cc (1850 lbs/hr) Normal range 0 to 1,000 psi (0 to 70 bar) Electrical Requirements *Melt rates vary with adhesive type and form. **May vary with specific gravity. *Width may vary depending on size of electrical panel. ITW Dynatec Suzhou Unit2, B1 Building No.9...

Open the catalog to page 2