™ DeltaFx™ Fiberized Spray Applicator DeltaFx™ fiberized spray applicators provide exceptional value and flexibility for wide adhesive lamination. Using the ITW Dynatec patented Laminate Plate Technology, DeltaFx™ provides an easy-to-use and maintain Non-Contact Application System. An excellent choice for a number of applications where speed, versatility and durability are required that works with all types of hot melt adhesives including PUR Hot Melts. DeltaFx™ Fiberized Spray Applicator: • Consistent coat weight application eliminates ridges and valleys common when using swirl applicators. • Random fiber patterns use less adhesive than spiral spray and maintain or improve bond strength. • Adhesive pattern widths can be easily adjusted by controlling the head height to the substrate. • Minimizes clean-up and reduces downtime. Performance Continuous application of adhesives including: PSA, APAO, and Reactive Hot Melts. Flexibility Quick-change pattern width(s) by adjusting the distance between head position and the substrate. Innovation Single nozzle permits a range of pattern widths up to 12 inches. (adhesive dependent) ITW Dynatec - DeltaFx™ Brand Fiberized Spray Applicators The Dynatec Difference... Actual Fiber Patterns Shown Easy Pattern Adjustment and Simplification DeltaFx™ applicators allow up to a 12” pattern width per head and can be easily changed to accommodate smaller widths by adjusting the distance between the applicator and the substrate itself. For applications requiring the use of reactive hot melt adhesives, DeltaFx™ has been designed with direct glue paths which eliminate blind and inactive adhesive passages. By reducing the risk of cured adhesive, DeltaFx™ provides a long and trouble-free operating life. Easy to clean and easy to set up, DeltaFx™ is the answer for those looking to reduce down time, improve productivity and reduce floor space in their laminating station.

™ Fiberized Spray Applicator System DeltaFx™ Comments Application Width per Nozzle Up to 305 mm (12 in) Varies depending upon distance to substrate. Adhesive Viscosity Lab Test Required - Temperature Range 40ºC to 200ºC (100ºF to 400ºF) - Warm-Up Time 15 min. (cold start) 0.8 - 1.5 bar (12-22 psi) Depends upon type of adhesive. Typical Air Flow per Nozzle Only the DeltaFx™ adhesive applicator allows web widths to be adjusted on the fly by changing the distance between the applicator and substrate itself. - Typical Application Air Pressure DeltaFx™ Mounting Brackets 2,500 (nl/h) (1.5 SCFM) - Wattage...