Labeler PA7100 + LA7000
8Pages

LABELING SYSTEMS – PRINTING & APPLICATION OF LABELS LA7000 label applicator and PA7100 print & apply labeler

LABELING SYSTEMS Printing and applying labels with the PA7100 TOUCH PRO Windows 10 Touch IPC including software package ✓ Flexible solution for operation and adjustment of your Diagraph labeler ✓ Industrial-strength and robust design ✓ Easy operation of the Touch IPC thanks to bright 10.2 inch TFT color display ✓ Multilingual menu navigation with colored icons ✓ Control multiple printing systems in network ✓ Label design using a:design2 and any Windows software (e.g. NiceLabel) Touch Pro Are you looking for fully automatic application of labels to your products? Then our labeling systems...

FULLY ELECTRIC, NO COMPRESSED AIR REQUIRED All Diagraph labelers work without compressed air. All movements are driven by precise servo motors. This saves costs and enables high-speed dispensing. CONTROL VIA TOUCHSCREEN All dispensing settings are made via user-friendly display. SENSOR-CONTROLLED Multiple sensors monitor the dispensing operation so that labels are applied reliably and precisely.

LABELING SYSTEMS LA7000 label applicator LA7000 label applicator CUSTOMER FEEDBACK This was the only machine for us, we are highly satisfied with the Diagraph labeling systems. Dieter Dörken, Head of Small Packaging at Feldsaaten Freudenberger in Krefeld Case: Feldsaaten labels The LA7000 is a label applicator that reliably applies pre-printed labels to your product. With a large range of different applicators, it is possible to apply labels to one side, two sides, or even around edges. The servo motors that drive the applicators ensure reliable and repeatable labeling, where all settings...

FULLY ELECTRIC, NO COMPRESSED AIR REQUIRED All Diagraph labelers work without compressed air. All movements are driven by precise servo motors. This saves costs and enables high-speed dispensing. CONTROL VIA TOUCHSCREEN All dispensing settings are made via user-friendly display. SUITABLE FOR ALL LABELS With the LA7000, labels of all shapes and in almost all sizes can be applied.

THE RIGHT DISPENSING ARM FOR EACH APPLICATION Linear dispensing stamp – TAMP The TAMP is the standard dispensing arm and is used by many companies. It can be used to apply labels to one side of the product. This can be the top, bottom or a side surface. With its integrated sensors, the TAMP can identify the product surface and can react automatically to different-sized products. This increases flexibility and reliability and also reduces complexity. The label is applied using a linear movement. To match your application, we supply the TAMP with different maximum travel between 125 mm and...

Two sides – FASA Using this dispensing arm, which applies the labels with a pivoting motion, you can apply labels to any side of your product. You can also dispense two labels to two different sides of a product. This could be the front and top – or any other combination. The FASA applicator is available with different arm lengths. This enables different ranges and cycle times. It is driven by servo motors and enables high dispensing speeds and precise positioning. This module is also ideally suitable for wrapping longer labels around an edge. Non-contact – BLOW In the case of especially...

TECHNICAL DATA LABELING SYSTEMS PA7100 print & apply labeler Print method Thermal transfer or direct thermal print Print system Print speed Print resolution Capacity of label roll 355 mm (outside diameter of roll), 76 mm (standard core diameter) 355 mm (outside diameter of roll), 76 mm (standard core diameter) E-TAMP; E-FASA; WASA; BLOW; HST ITW DIAGRAPH GMBH Friedrich-Bergius-Ring 30 97076 Würzburg, Germany WIPE; E-TAMP; E-FASA; WASA; BLOW; HST E-mail info@diagraph.de Website www.diagraph.de