Straight male adaptor (parallel)
Straight male adaptor (parallel)
The document describes a straight male adaptor with parallel threading, suitable for use with PVC seals and NBR O-Rings. The operating temperature ranges from -20°C to +70°C for PVC seals and -20°C to +80°C for NBR O-Rings. The operating pressure is up to 16 bar, and it can handle a maximum vacuum of 98%. The body is made of nickel-plated brass (CW614N and CW617N), with NBR sealing, stainless steel clamp (AISI 316L), and a black plastic thrust ring.
Procedures:
The adaptor is compatible with lubricated and non-lubricated compressed air. It is designed for use with tubes that comply with ISO 14743 standards, specifically recommending PU and PA materials. Tolerances for external diameters are specified as ±0.1 mm for 4 to 8 mm tubes and ±0.15 mm for 10 to 14 mm PU tubes, and ±0.1 mm for 10 to 14 mm PA tubes.
Standards:
The threading complies with DIN EN ISO 228 for cylindrical threads, DIN EN ISO 10226 for conical threads, and DIN ISO 261 for metric threads.
Recommendations:
For fittings with a tube diameter of 16 mm, refer to chapters ipso 01 MR and ipso 01 FKM.
Materials:
The document specifies the use of silicone-free NBR for sealing and stainless steel for the clamp, ensuring compatibility with the medium used.
Catalog excerpts
Werkstoffe: Gehause - Messing vernickelt Dichtungen - NBR Spannzange - Edelstahl Druckring - Kunststoff schwarz Gewinde: zyl. Gewinde DIN EN ISO 228 kon. Gewinde DIN EN 10226 metr. Gewinde DIN ISO 261 Medium: geolte und ungeolte Druckluft Schlauche: fur Leitungen nach ISO 14743 abhanging vom Druckbereich des eingesetzten Schlauches CW614N und CW617N silikonfreie Mischung AISI 316L Medien, die mit den Materialien der Bauteile vertraglich sind empfohlene Materialien: PU, PA push-in fittings Raccordi automatici Materials: Body - brass, nickel plated Sealing - NBR Clamp - stainless steel thrust ring - plastic black con. thread DIN EN ISO 10226 metr. thread DIN ISO 261 Medium: lubricated and non-lubricated compressed air Tubes: for tubes in line with ISO 14743 Tolerances for external diameter: for fittings with PVC seals for fittings with NBR O-Rings depends on pressure range of tube with O-Ring sealing Medium which is compatible with component materials recommended material: PU, PA
Open the catalog to page 1
push-in fittings Raccordi automatici Verschraubungen für Schlauchdurchmesser 16 finden Sie in den Kapiteln ipso 01 MR und ipso 01 FKM. You can find fittings for tube diameter 16 in chapters ipso 01 MR and ipso 01 FKM. Per raccordi tubi diametro 16 vedere capitoli ipso 01 MR e ipso 01 FKM.
Open the catalog to page 2All ITV catalogs and technical brochures
ipso 01 FKM1 Page
Double nipple1 Page
Silencer1 Page
Silencer with nut1 Page
Archived catalogs
ITV Pneumatik265 Pages
Standard fittings Type 10043 Pages
Functional fittings20 Pages
