ipso 01 FKM
ipso 01 FKM
The document describes a straight male adaptor with parallel threading, suitable for use with lubricated and non-lubricated compressed air. The operating temperature ranges from -20°C to +150°C, depending on the pressure range of the tube, with a maximum operating pressure of up to 16 bar and a vacuum capacity of up to 98%.
The body is made of CW614N and CW617N brass, nickel-plated. The sealing is made from a silicon-free FKM mixture. The clamp is constructed from AISI 316L stainless steel, and the thrust ring is made of nickel-plated brass.
The adaptor features cylindrical threads conforming to DIN EN ISO 228, conical threads according to DIN EN 10226, and metric threads as per DIN ISO 261.
The adaptor is compatible with media that are suitable with the component materials, specifically designed for use with PU and PA tubes in line with ISO 14743 standards.
The tolerances for external diameters are specified as follows: 4 to 8mm with a tolerance of +-0.1, and 10 to 14mm with a tolerance of +-0.15 for PU and +-0.1 for PA.
Catalog excerpts
Betriebsdruck: bis 16bar abhanging vom Druckbereich des eingesetzten Schlauches Werkstoffe: Gehause - Messing vernickelt CW614N und CW617N Dichtungen - FKM silikonfreie Mischung Spannzange - Edelstahl AISI 361L Druckring - Messing vernickelt CW614N Gewinde: zyl. Gewinde DIN EN ISO 228 mit O-Ring-Abdichtung kon. Gewinde DIN EN 10226 metr. Gewinde DIN ISO 261 Medium: geolte und ungeolte Druckluft Medien, die mit den Materialien der Bauteile vertraglich sind Schlauche: fur Leitungen nach ISO 14743 empfohlene Materialien: PU, PA Operating pressure: up to 16bar depends on pressure range of tube Materials: Body - brass, nickel plated CW614N and CW617N Clamp - stainless steel AISI 316L thrust ring - brass, nickel plated CW614N Thread: cyl. thread DIN EN ISO 228 with O-Ring sealing con. thread DIN EN ISO 10226 metr. thread DIN ISO 261 Medium: lubricated and non-lubricated compressed air Medium which is compatible with component materials Tubes: for tubes in line with ISO 14743 recommended material: PU, PA Tolerances for external diameter: push-in fittings Raccordi automatici
Open the catalog to page 1All ITV catalogs and technical brochures
Double nipple1 Page
Silencer1 Page
Silencer with nut1 Page
Archived catalogs
ITV Pneumatik265 Pages
Standard fittings Type 10043 Pages
Functional fittings20 Pages
