MDSM Catalog
16Pages

RoHS Compliance Information ITT has implemented a strict parts control plan for all ITT electronics plants worldwide that allows the Cannon, VEAM and BIW Connector Systems product portfolios to meet the requirements of European Union Directive 2002/95/EC better known as the Reduction of Hazardous Substances initiative. As appropriate, specific Cannon, VEAM and BIW Connector System products may be ordered with an R prefix number which insures our customers will receive RoHS compliant parts for their commercial electronics applications and equipment. Since most RoHS hazardous substances...

MICRO MDSM Shielded Connectors MICRO MDSM is the Cannon designation for a shielded interface connector in its Microminiature series. It is ideally suited for applications with specific requirements to the shielding, e.g. components for telecommunications and computers. The MDSM connector is suitable for modern solder methods, e.g. IR reflow and vapor phase soldering. It is available with crimp contacts (sockets only) as a cable connecting receptacle. Or with 90° solder pins as a pcb connector. The contacts are spaced at 1.27 mm, the solder pins at 1.27 x 2.54 mm. Different locking devices...

MICRO MDSM Shielded Connectors Order Reference MDSM - 9 P E - Z7 - VR - * Series Number of contacts 9, 15, 25 Contact type P - Pin S - Socket (with crimp termination only) Termination method C - Crimp termination (contacts to be ordered separately) E - Solder pin 90°, spacing 1,27 x 2,54 mm, with rivet nut and grounding tab (Pin connector only) Mounting method Z7 - Locking screw 1) Z10 - Screw for wall thickness 1,5 mm 1) Z11 - Screw, long, blank 2) Z12 - Screw for wall thickness 1,0 mm 1) Z24 - Push pull 2) Z33 - Locking screw, short 1) Z34 - Screw, short, for wall thickness 1,5 mm 1) Z35...

MICRO MDSM Cable Connector Socket contacts see page 8 PCB Connector 90° with pin contacts * indicate mounting method

MICRO MDSM Doubledecker This connector version offers higher packaging density. The MDSM Doubledecker provides twice the number of contacts in only 30% extra space. Two Standard MDSM cable connectors with the corresponding number of contacts mate with the MDSM Doubledecker. The MDSM Doubledecker is available with pin contacts only. Technical Data Insulator Contact guiding plate Shell Contacts Contact finish Contact termination area Contact spacing Contact number Temperature range acc. DIN IEC 68 Part 1 Thermoplast, UL94V-0 PA, high temperature resistant Steel, tinned and nickel plated...

MICRO MDSM Doubledecker Order Reference MDSM - 18 P E - Z7 - VR Series Number of contacts 18, 30 Contact type P - Pin Termination method E - Solder pin 90°, spacing 1,27 x 2,54 mm with rivet nut and grounding tab Mounting method* Z7 - Locking screw Z10 - Screw for wall thickness 1,5 mm Z12 - Screw for wall thickness 1,0 mm * Additional mounting methods on page 9 Packaging VR - Tube packaging (not for termination method C) Tube packaging (VR) A tube contains the following numbers of MDSM connectors: No. of contacts 18 30 Ordering MDSM connectors Tube loaded connectors can only be supplied in...

MICRO MDS/MDSM Signal Contacts on reels / 1000 pieces (TS) MDS-P-TS MDS-S-TS Pin contact Socket contact on reels / 10 000 pieces (RL) MDS-P-RL MDS-S-RL Pin contact Socket contact The contacts (1.2 mm PdNi with 0.1 µm Au over 0.5 µm Ni) are tin plated in the crimp area. Wire size AWG 28 – 26 (0.09 – 0.14 mm2).

MICRO MDSM Screw locking for cable connectors (socket side) Z11 Screw, long, blank for pcb connectors (pin side) Z7 Locking screw Z10 Screw for wall thickness 1.5 mm Z12 Screw for wall thickness 1 mm Z33 Locking screw, short Z34 Screw, short, for wall thickness 1.5 mm Z35 Screw, short, for wall thickness 1 mm Push Pull for cable connectors (socket side) Z24 Push pull for pcb connectors (pin side) Z41 Locking pin Z42 Screw, for wall thickness 1.5 mm Z43 Screw, for wall thickness 1 mm

MICRO MDSM with straight solder pins Due to customer requirements connectors MDSM-9PE-Z** with 90° termination are not suitable for all applications. There is great interest for a MDSM version with straight terminations. To fulfill market requirements the following connector versions and tools were developped: MDSM-9PA-Z7/Z10 and MDSM-9PA-Z41/Z42 with straight terminations and pcb locking. Typical Applications SSA band and disk drives, SSA distribution panels, bar code readers, mobile telecommunications and medical equipment. Locking of PC Board The mating and unmating forces are...

MICRO MDSM Dimensions Mounting Methods

MICRO MDSM with crimp contacts, for panel mounting The market shows great interest for a MDSM Inline receptacle with pin contacts for crimp termination. To fulfill this requirements the following connector versions and tools have been developped to accomodate pin contacts crimped to wire sizes AWG 28 – 26: - MDSM-9PC-Z7/Z10-O- VS1 - MDSM-9PC-Z42-O-VS1 Contacts Contacts MDS-P-TS (1000 contacts / reel) or MDS-P-RL (10.000 contacts / reel) to be ordered separately. MDSM-9PC Connector with screw locking Technical Data Insulator Shell Contacts Contact finish Contact termination Wire size Contact...

^ITT cannon

MICRO – Round Cable for connectors MDSM MDSM Stranded wire Conductors Wall thickness AWG 26: generally min. 0,140 mm AWG 28: generally min. 0,152 mm for all: min. permissible thickness at any position .127 mm Cable Shielding Shielding braid, tinned copper, coverage min. 80% Wall thickness Outer diameter Temperature range Operating voltage Test voltage Conductor resistance * Cable with 9 wires or 5 twisted pairs ** Cable with more than 9 wires or more than 5 twisted pairs Other tools Hand crimp tool (for reeled contacts) Semi-automatic stripper / crimper Insertion tool

Product Safety Information THIS NOTE SHOULD BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/CATALOGUE. FAILURE TO OBSERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/ CATALOGUE COULD RESULT IN HAZARDOUS SITUATIONS. 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and...