CGE Catalog
8Pages

CGE These high power connectors feature one contact in a two-piece rigid insulator. The aluminum shell has a chromate finish over cadmium. The operating temperature ranges from -55˚C to +125˚C (-67˚F to +257˚F). The contacts of copper or copper alloy with hard sliver finish are designed for crimping* or termination to solid copper conductors with threaded bolts. The mechanical durability is a minimum of 500 mating cycles. The crimp contacts accept wires per DIN 46438 (25-240 sq. mm). Contact retention is achieved by the two-piece insulator, which is fixed to the shell with a snap-in ring....

Series Cannon Designation Shell style 0 - wall mounting receptacle with flange 1 - cable connecting plug 2 - box mounting receptacle with flange 6 - straight plug 8 - plug 90º 9- bulkhead Class E - environmental, JP67 acc to DIN 40050 Shell size 16 - 18 - 22 - 28 - 32 Contact arrangement 16H2 - shell size 16, 1 contact H2 18H5 - shell size 18, 1 contact H5 22H9 - shell size 22, 1 contact H9 28H15 - shell size 28, 1 contact H15 32H24 - shell size 32, 1 contact H24 Contact size H2 - 25 mm2 H5 - 50 mm2 H9 - 95 mm2 H15 - 150 mm2 H24 - 240 mm2 Contact type F - spring contact X - CYL - Spring...

Series Basic Part Number Connector Style A1 - Wall mounting receptacle; rear mounting flange with through holes A2 - Wall mounting receptacle ; rear mounting flange with threaded contact terminal B1 - Wall mounting bulkhead receptacle C - Wall mounting receptacle; rear mounting square flange with heat shrink boot adaptor E - Plug with 90; shielded with heat shrink boot adaptor F - Straight plug with heat shrink book adaptor G - Straight plug; shielded with heat shrink book adaptor Connector Size 16 18 22 28 32 Contact Number F - Socket Z - Pin Keyway Position N - 180º W - 120º Note: For...

CGE Performance and Material Specifications Mechanical Data Admissible ambient temperature -55º C to +125º C JP 67 according to DIN 40050 Test pressure: 1 bar over pressure Test duration: 16 hours 200 m/s2 for 16 to 2000 Hz 500 mating cycles Class Vibration Mechanical Durability Electrical Data Contact Rating Shell Size Contact Size Max Current rating (amps at 125º C ambient temperature) Max short-time load approximate 0,5 - 1 sec. (amps) Air and Creepage Paths Air path Creepage path Contact Resistance Contact Size Contact Resistance (m0hm max) Materials and Finishes Shell Finish Insulator...

Threaded holes in flange, adapter for heat shrink boot rear panel mounting, -04 - Threaded holes in flange, -05- Through holes in flange Shell size Front panel mounting, Through holes in flange, threaded bolt termination for solid copper rail Dimensions shown in inches (mm) Specifications and dimensions subject to change I

Straight Plug Adapter for heat shrink boots Straight Plug grounding fingers, Shielded endbell for heat shrink boots With grounding fingers, for heat shrink boots -03 - Adapter for heat shrink boots Dimensions shown in inches (mm) | Specifications and dimensions subject to change

CGE CGE9E – X-B-04 Bulkhead acc to VG 96929C1, C2 C1- threaded holes in flange C2 - with through holes in flange Accessories Metal Dust caps for CGE plugs and receptacles Please see page 1147 in the CA-Bayonet section Dust caps of CA-B can be utilized for CGE in accordance iwth the relevant size Sealing Gaskets Shell Size 16 18 22 28 32 Contact Crimp Tools Crimp Tool Hydraulic, hand operated: Electro-hydraulic, 230 V AC operated Dimensions shown in inches (mm) Specifications and dimensions subject to change