TECHNICAL DESCRIPTION WATER TEST CHAMBER SPK R200 / R400 / R600 / R800

INNOVATIVE TEST & FULFILLED STANDARDS AND REGULATIONS - SPK SERIES The iTS Water Test Chamber SPK series enables standard-compliant testing of "electrical equipment inside an enclosure" against effects of water ingress. The following standards and specifications for the area of "water testing" can be fulfilled. Special options are required depending on the test component or standard.

INNOVATIVE TEST & STANDARD SCOPE OF DELIVERY - SPK SERIES Protection type code The Water Test Chamber SPK is a self-contained system and can be easily positioned in the test room using the castors. After connecting the system, reproducible tests can be carried out again and again. The equipment required for this is housed in the test chamber or in the add-on tunnel. The SPK enables the testing of all common test standards in ONE chamber. The equipment for IPX3/4 tests is included in the standard version. The chamber can be customised thanks to its modular design. Additional options for further...

INNOVATIVE TEST & STANDARD SCOPE OF DELIVERY - SPK SERIES SPK - Series

STANDARD SCOPE OF DELIVERY - SPK SERIES In the centre of the test chamber there is a height-adjustable turntable for holding the test specimen. Turntable support with height adjustment (illustration shows turntable from SPK R200) The turntable is driven by a geared motor. The rotation speed is preselected on the control unit (1-5 rpm) or set automatically if test specifications are stored. The turntable can be operated in reversing mode. This is necessary for testing electrically operated DUTs to prevent the cable from unwinding and travelling. iTS turntable with castors (illustration shows turntable...

INNOVATIVE TEST & STANDARD SCOPE OF DELIVERY - SPK SERIESEquipment for IP X3/X4 tests • The following functions are integrated for test operation with IP X3/4 swivel tubes: • The swivel tube is driven by a geared motor. The corresponding drive unit and the pump unit for the water supply are installed outside the test room. • The flow rate is set automatically via a control valve; in addition, a flow meter with a measuring range of 0-5 l/min records the flow rate. • The water pressure is measured by a pressure sensor (0 - 6 bar). • The iTS swivel tubes (see accessories) are mounted to the corresponding...

INNOVATIVE TEST & STANDARD SCOPE OF DELIVERY - SPK USER INTERFACEControl system • The Water Test Chambers of the SPK series are equipped with a PLC control system. All required test parameters are entered via a 15' touch panel. • Predefined parameter sets are available for tests in accordance with DIN EN ISO 60529, ISO 20653 and other common standards and automotive delivery specifications (standard-based test parameter sets cannot be changed) and can be selected directly on the start screen. The SPK can be operated in manual and automatic mode. • The operator can compile their own customised...

STANDARD SCOPE OF DELIVERY - SPK USER INTERFACE User interface with IPX3/4 testing in accordance with DIN EN ISO 60529 User interface with IPX5/6 testing in accordance with DIN EN ISO 60529

INNOVATIVE TEST & GENERAL REQUIREMENTS ON-SITE - SPK SERIES Climatic conditions • Note: The adapter for the connection is included in the scope of delivery.

INNOVATIVE TEST & GENERAL REQUIREMENTS ON-SITE - SPK SERIES Water supply • Note: The test water should never exceed a water hardness of 6°dH, especially for the IPX9K option, as this will result in increased limescale formation during heating. This increased limescale precipitation leads to a significantly shorter service life of the high-pressure pump and the heating elements in the hot water tank. To increase the service life of the nozzles and pumps, we recommend the use of demineralised water or a softening system (see options). • Note: The waste water is actively pumped (up to max. 1.3 m)....

OVERVIEW: OPTIONS - SERIES SPK INNOVATIVE TEST & Option number

OVERVIEW: OPTIONS - SERIES SPK INNOVATIVE TEST & Option number

OVERVIEW: OPTIONS - SERIES SPK INNOVATIVE TEST & Option number For individual description of the options please ask for extended version of the description.

INNOVATIVE TEST &MEASUREMENTSYSTEMS REMARK We reserve the right to make design and technical changes in the interests of further technical development. This applies to the entire technical description. INNOVATIVE TEST & MEASUREMENT SYSTEMS IndustriestraBe 18 47589 Uedem / Germany Internet: www.its-gmbh.de/ Email: [email protected]