*mydirectindustry

Catalogs
iTS GmbH
TURNTABLE DT SERIES

TURNTABLE DT SERIES

Product catalog summary

Standard Scope of Supply – DT Series

The DT series turntables are designed for positioning test items for standard IP protection class tests, suitable for both cold and hot water applications, including IPX9K tests. They feature a reversing function to prevent cable tangling for electrically powered specimens. The series includes various models with different diameters and load capacities, with the HD version available for larger and heavier specimens.

Specifications:

Diameter: 800 mm to 1500 mm
Load Capacity: 200 kg to 1000 kg
Operating Modes: Continuous, Positioning, Reversing
Adjustable Speed: 0–5 rpm
Power Supply: 230V+N+PE / 50Hz

Control – DT Series PRO

The turntable is controlled via a 7” touch panel installed in a wall-mounted control cabinet. It can operate in three modes: Continuous, Positioning, and Reversing. Speed and angles are adjustable, and a timer is available for setting the running time.

General On-Site Requirements

Environmental conditions for installation include an ambient temperature of 10 - 30°C and a maximum relative humidity of 70% (non-condensing).

Options for DT Series

DT.OP-10 (11816): A simplified control version without a touch panel, using a potentiometer and toggle switch, with fixed reversal points.
DT.OP-300 (14898): Provides an additional support with a diameter of 600 mm, with a load capacity of 80 kg, easily interchangeable with the standard support.

Note

Design and technical changes may occur as part of ongoing development.

Catalog excerpts

TECHNICAL DESCRIPTION

Open the catalog to page 1

INNOVATIVE TEST & STANDARD SCOPE OF SUPPLY - DT SERIES The turntables of the DT series enable the positioning of the test item for all standard IP protection class tests. The turntables can be used for all cold water tests involving drip water, splash water and jet water. Furthermore, the turntables are suitable for hot water applications such as IPX9K tests. Thanks to the reversing function, electrically powered test specimens can also be tested on the turntable. This prevents the cable from becoming tangled. The table below provides an overview of the various sizes of the turntables. For very...

Open the catalog to page 2

STANDARD SCOPE OF SUPPLY – DT SERIES The turntable can be positioned freely within the room. The PRO version is mounted on castors for this purpose and can be aligned using levelling feet before use. The HD version is fitted with mounting points that allow the turntable to be positioned using a pallet truck or forklift. This version is also adjustet using levelling feet.

Open the catalog to page 3

INNOVATIVE TEST & CONTROL - DT SERIES PRO • The turntable is controlled via a 7" touch panel • The panel and the PLC are installed in a compact control cabinet designed for wall mounting • The connection cables to the turntable are 5 m long (longer lengths available on request) • The wall-mounted cabinet should be installed in a dry area of the test room Note: If the turntable is used in conjunction with one of ITS's other units (e.g. swivel tube system / tank module) for wet room solutions, the power supply is provided by that unit. • The turntable can be operated in 3 modes: Continuous operation...

Open the catalog to page 4

INNOVATIVE TEST & GENERAL ON-SITE REQUIREMENTS Environmental installation conditions A description of the individual options is provided below.

Open the catalog to page 5

INNOVATIVE TEST & OPTIONS FOR DT SERIESDT.OP-10 (11816) - EASY - Turntable control without touch panel • Easy version for simple applications • Instead of the touch panel, the turntable is controlled via a potentiometer and a toggle switch • The components are installed in a compact control cabinet • The control cabinet is designed for wall mounting • Reversing operation has fixed reversal points at +175° and -175° • This version does not feature positioning mode • In this version, the speed of the turntable is adjusted using a potentiometer DT.OP-300 (14898) - Turntable attachment diameter 600...

Open the catalog to page 6

INNOVATIVE TEST &MEASUREMENTSYSTEMS NOTE We reserve the right to make design and technical changes in the interests of technical development. This applies to the entire technical description. INNOVATIVE TEST & MEASUREMENT SYSTEMS IndustriestraBe 18 47589 Uedem / Germany Website: www.its-gmbh.de/ Email: [email protected]

Open the catalog to page 7

TURNTABLE DT SERIES

TURNTABLE DT SERIES

Catalog excerpts

All ITS GmbH catalogs and technical brochures