STEAM JET TESTER DWT

Product catalog summary

Overview: The document provides a technical description of the Steam Jet Tester from the DWT series by iTS GmbH, designed for testing the resistance of coatings to pressure water-jetting. It includes details on standards, specifications, and optional features.

Standards and Regulations: The DWT series complies with several standards, including DIN EN ISO 16925:2014, DBL 5416, and BMW AA-0136. Optional compliance is available for standards like Scania STD4234 and Ford FLTM BO 160-04.

Standard Scope of Delivery: The DWT series is a self-contained system with two models, DWT 500 and DWT 1000, differing in internal and external test chamber dimensions. Both models include LED lighting, a right-positioned control panel, and polished stainless steel surfaces.

General Requirements on Site: The system requires a specific electrical setup, including a CEE socket outlet with a residual current device. It operates within ambient temperatures of 10-30°C and a maximum relative humidity of 70%. The power supply is 3 x 400 Volt/50Hz with a power consumption of up to 22 kW.

Water and Air Supply: The system requires municipal water with a minimum conductivity of 30 µS/cm and a maximum hardness of 6°dH. Compressed air supply should be between 3-6 bar, with a quality of ISO 8573-1:2010 [3:3:4].

Options: Various optional features are available, such as pendulum stroke for water jet, parallel slides for samples, and different flat spray nozzles according to specific standards. Additional options include data recording and water softening units.

Note: The document reserves the right to make design and technical changes for further development.

Catalog excerpts

TECHNICAL DESCRIPTION

Open the catalog to page 1

The iTS steam jet tester from the DWT series enable standard-compliant testing of the resistance of coatings to pressure water-jetting. Depending on the test component or standard, options may be required. Further test specifications according to OEM specifications can be integrated (e.g. TPJLR Jaguar / Land Rover).

Open the catalog to page 2

• Note: The adapter for the connection is included in the scope of delivery.

Open the catalog to page 3

• Note: The waste water is actively pumped (up to max. 1.3 m). Otherwise, the test chamber is emptied via a manual drain valve. All connections are located on the back of the water jet tester.

Open the catalog to page 4

The individual options are described below.

Open the catalog to page 5

We reserve the right to make design and technical changes in the interests of further technical development. This applies to the entire technical description. INNOVATIVE TEST & MEASUREMENT SYSTEMS IndustriestraBe 18 47589 Uedem / Germany Internet: www.its-gmbh.de/ Email: [email protected]

Open the catalog to page 6

STEAM JET TESTER DWT

STEAM JET TESTER DWT

Catalog excerpts

All ITS GmbH catalogs and technical brochures