SPRAY NOZZLE FOR IPX3 / IPX4

Product catalog summary

Fulfilled Standards and Regulations
The spray nozzle is designed for testing electrical equipment against water ingress, compliant with standards IEC 60529:1989 + A1:1999 + A2:2013 and ISO 20653 for IPX3/X4 water protection.

Standard Scope of Delivery
The spray nozzle features a 102 mm diameter shower head with 121 openings of 0.5 mm each. It includes a movable cover for jets deviating more than 60° from vertical, a flow meter for water flow rate (0-12 l/min), and a throttle valve. The package includes a 3-meter hose and GEKA couplings.

General On-Site Requirements
Water should not exceed 6°dH hardness; demineralised water is recommended. Installation conditions include an ambient temperature of 10-30°C, max 70% relative humidity, and city water with a minimum conductivity of 30 µS/cm. Water pressure should be 2 bar, with a removable volume of 20 l/min and max hardness of 5 dH.

Remark
Design and technical changes may occur for further development.

Contact Information
iTS GmbH, Industriestrasse 18, 47589 Uedem, Germany. Email: [email protected], Tel: +49 2825 - 30798-0.

Catalog excerpts

TECHNICAL DESCRIPTION

Open the catalog to page 1

INNOVATIVE TEST & FULFILLED STANDARDS AND REGULATIONS - SPRAY NOZZLE The spray nozzle enables standard-compliant testing of "electrical equipment inside an enclosure" against effects of water ingress. The following standards and specifications for the IPX3/X4 "spray water and splash water" range can be met. Spray nozzle

Open the catalog to page 2

INNOVATIVE TEST & STANDARD SCOPE OF DELIVERY - SPRAY NOZZLE Spray nozzle • The shower head has a diameter of 102 mm, the curvature of the shower head has a radius of 75.5 mm. The shower head contains 121 openings with a diameter of 0.5 mm. • The shower head can be dismantled for cleaning (e.g. for descaling). • A movable cover with counterweight is mounted on the shower head. In accordance with the standards, this cover covers all jets that deviate from the vertical by more than 60°. • The water flow rate is recorded and displayed by a flow meter (measuring range from 0 -12 l/min). The flow rate...

Open the catalog to page 3

INNOVATIVE TEST &MEASUREMENTSYSTEMS We reserve the right to make design and technical changes in the interests of further technical development. This applies to the entire technical description. INNOVATIVE TEST & MEASUREMENT SYSTEMS Industriestrasse 18 47589 Uedem / Germany Internet: www.its-gmbh.de/ Email: [email protected] Spray nozzle

Open the catalog to page 4

INNOVATIVE TEST & Spray nozzle

Open the catalog to page 5

SPRAY NOZZLE FOR IPX3 / IPX4

SPRAY NOZZLE FOR IPX3 / IPX4

Catalog excerpts

All ITS GmbH catalogs and technical brochures