DUST CHAMBER SK SK 2000 Q / L / D / QD

Product catalog summary

Overview: The document provides a technical description of the SK 2000 series dust chambers by iTS GmbH, designed for standard-compliant testing of electrical equipment against dust ingress. It outlines the standards met, specifications, options, and accessories available for the SK series.

Standards and Regulations: The SK series complies with several standards including IEC 60529, ISO 20653, EN 60068-2-68, IEC 60598-1, LV 124, BMW GS 95003-4, and SAE 575 (with options). Optional configurations are available for specific standards like JIS D203.

Specifications: The SK series includes models Q, L, D, and QD, each with varying internal and external dimensions. All models feature LED lighting, two dust blowers, and one vacuum device. The chambers are equipped with a cable entry port and have a load capacity of 100 kg.

General Requirements: The dust chambers require a power supply of 3 x 400 Volt/50Hz and a compressed air supply of 3-6 bar. The ambient temperature should be between 10-30°C with a maximum relative humidity of 70% (non-condensing).

Comparison of Models: The document compares the SK 2000 series models based on test chamber size, DUT size, dust types, and preparation/testing time. Models offer different configurations for long or compact DUTs and allow for the use of different dust types in separate chambers.

Options and Accessories: Various options are available, including calibration services, additional flow meters, and data recording capabilities. Accessories include different types of test dusts and a starter kit for the dust chamber.

Note: The document concludes with a disclaimer that design and technical changes may occur as part of ongoing development.

Catalog excerpts

DUST CHAMBER SK SK 2000 Q / L / D / QD-1

TECHNICAL DESCRIPTION

Open the catalog to page 1

DUST CHAMBER SK SK 2000 Q / L / D / QD-2

The iTS dust chambers from the SK series enable standard-compliant testing of electrical equipment inside an enclosure against the ingress of dust. The following standards and specifications for dust testing are met. Depending on the test component or standard, options may be required.

Open the catalog to page 2

DUST CHAMBER SK SK 2000 Q / L / D / QD-4

• Note: The adapter for the connection is included in the scope of delivery.

Open the catalog to page 4

DUST CHAMBER SK SK 2000 Q / L / D / QD-5

INNOVATIVE TEST & Selection criteria

Open the catalog to page 5

DUST CHAMBER SK SK 2000 Q / L / D / QD-6

OVERVIEW: OPTIONS - SK SERIES The individual options are described below.

Open the catalog to page 6

DUST CHAMBER SK SK 2000 Q / L / D / QD-7

OVERVIEW: ACCESSORIES - SK SERIES The accessories are described below.

Open the catalog to page 7

DUST CHAMBER SK SK 2000 Q / L / D / QD-8

We reserve the right to make design and technical changes in the interests of further technical development. This applies to the entire technical description. INNOVATIVE TEST & MEASUREMENT SYSTEMS IndustriestraBe 18 47589 Uedem / Germany Internet: www.its-gmbh.de/ Email: [email protected]

Open the catalog to page 8

DUST CHAMBER SK SK 2000 Q / L / D / QD

DUST CHAMBER SK SK 2000 Q / L / D / QD

Catalog excerpts

All ITS GmbH catalogs and technical brochures