PM605KT & CBK-109
4Pages

The PM605KT is designed for conveying medium and heavy loads (up to 1000kg). It is the most powerfull 24Vdc MDR on the market and is perfect for carrying heavy unit loads (manufacturing, automotive…) or pallets. It’s high torque and durability also makes it a solution of choice for high tension or heavy loaded belt on roller conveyors. The controller is separated from the gear-motor in order to optimize the performance and the durability of the roller and to offer a larger range of control options. Applicable circuit boards Standard

Advantages Acceleration / deceleration Powerful and robust The roller is made of steel end cap with precision bearings, and of a gearmotor of more than 880N of tangential force on start up, in a 3.25mm thick tube. The roller PM605KT can transport a load up to 1000kg, with a 15m/min speed. It is possible to adjust the transport speed (from 0.1 to 2.5 sec) with a soft acceleration and deceleration allowing the safe transport of loads that could be unstable. Speed variation Dynamic braking 20 speeds internal / external (by tension) are available for the optimum setting. The instantaneous...

STATUS/ERR/PWR 1. AUTO/MANU 2. INT/EXT 3. DIRECTION 4. E-OUT/N-OUT 5. L/H Electro-mechanical characteristics Characteristics Motor Absorbed power (W) Dynamic braking / Mechanical brake IP54, cold room, IP65 (Contact us for other classes) Protection index Lenght (contact us L>1500) Input signal Start / Stop, Direction of rotation Speed setting 20 speeds with a rotating switch or 20 speeds by external analog voltage of 0-10VDC Adjustable with potentiometer from 0.1 to 2,5s Error signal output Low voltage / Lock error / CB or MDR thermal error / Back EMF error Built-in 15A fuse (on the...

STATUS/ERR/PWR 1. AUTO/MANU 2. INT/EXT 3. DIRECTION 4. E-OUT/N-OUT 5. L/H Start / Stop Direction of rotation Speed variation Error signal Pulse signal Acceleration / Deceleration Floor conveyor STOP STOP Belt conveyor Cold room References ENGINES CONVEYOR PALETTES STORAGE PACKAGE MANAGEMENT ITOH DENKI EUROPE S.A.S. 490, Avenue des Jourdies - P.A.E. les Jourdies 74800 St-Pierre-en-Faucigny - France Tel : +33 (0)4 50 03 09 99 - E-mail : info@itoh-denki.com P1.1