PM605FE and CBM105

Product catalog summary

Overview: The PM605FE motorized roller with brushless technology operates at 24VDC and is compatible with circuit boards CBM-105 or HB510. It is designed for conveying light to medium loads up to 500kg, suitable for order preparation, distribution, and assembly lines. The circuit board is separate from the gear-motor to enhance performance and durability, offering functions like pulse signals and acceleration/deceleration control. The system can be managed via a PLC.

Specifications:

Motor: Direct current, brushless 24 VDC.
Power: Nominal 25 - 67.2 W, start-up 96 W.
Tangential Force: Nominal 110.7 - 118.9 N, start-up 289.1 N.
Operation: Continuous or intermittent, up to 1800 starts/hour.
Speed: Ranges from 2.7 to 126.0 m/min depending on load.
Protection Index: IP54, IP65 available.
Length: 235 to 1500 mm.
Static Load: Max 160 - 80 kg per roller.

Advantages:

High transfer capacity and reliability with dynamic braking.
Eco-friendly and safe with low voltage operation.
Adjustable acceleration/deceleration for safe transport of unstable loads.
Modular design for easy installation and modification.
Error detection and protection against overload, overheating, and incorrect wiring.

Control Features:

Input signals for start/stop and rotation direction.
Speed setting via rotating switch or external analog voltage.
Adjustable acceleration/deceleration with potentiometer.
Servo-brake activation via dip switch.
Error signal output for overheating, wiring errors, and voltage issues.

Applications: Suitable for zero pressure accumulation, 90° transfer, cold room operations, length measurement, gate and floor conveyors, with controlled stopping distance via pulsed signal.

Options/Variants: Contact for specifics on mechanical brake versions and other customizations.

Catalog excerpts

The motorized roller PM605FE with brushless technology 24VDC, used with circuit board CBM- 105 or HB510 is designed for conveying light and medium loads (up to 500kg) or order preparation, distribution, and for assembly lines. This circuit board is separated from the gear-motor in order to optimize the performance, durability of the roller and to offer diverse functions such as pulse signals, acceleration/deceleration, optional position holder... The assembly can be controlled by PLC. Applicable circuit boards Standard

Open the catalog to page 1

Advantages High capacity and reliable The transfer speed is high with a rate of up to 1800 start up / hour. Stops are accurate and reliable thanks to the dynamic brake, without wear off. No noise or oil rejection. Everything works with very low voltage, without compressed air. Acceleration / Deceleration It is possible to adjust the transport speed (from 0 to 2.5 sec) with a soft acceleration and deceleration allowing the safe transport of loads that could be unstable. Decentralized motorization, mounting and ease of use, simplified and fast line modification. Error signal and protection Servo...

Open the catalog to page 2

Without brake motorized roller version : PM605FE For more informations about version with mechanical brake, contact us. ERR/PWR 1. AUTO/MANU 2. INT/EXT 3. DIRECTION 4. E/N-OUT 5. SV-BRK 6. N/P-OUT Electro-mechanical characteristics Characteristics Motor Absorbed power (W) Tangential force (N) Continuous or intermittent 1800 starts/h max. Minimum duty cycle : 1s ON / 1s OFF Dynamic braking no load Protection index (motor roller) Lenght 300 - 1200 mm = 160 - 80 kg per roller Start / Stop, Direction of rotation Selection of rotation direction By dip switch (CW/CCW) or input signal 20 speeds with...

Open the catalog to page 3

Wiring PLC Start / stop Direction of rotation Speed variation Error signal Pulse signal Zero pressure accumulation (ZPA) Cold room Length measurement Floor conveyor Acceleration / Deceleration Stopping distance controlled by pulsed signal (CBM-105) References ORDER PREPARATION ITOH DENKI EUROPE S.A.S. 490, Avenue des Jourdies - P.A.E. les Jourdies 74800 St-Pierre-en-Faucigny - France Tel : +33 (0)4 50 03 09 99 - E-mail : [email protected] P1.1

Open the catalog to page 4

All ITOH DENKI EUROPE catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list