Stairway/Platform System Comprehensive Catalogue

Stairways and platforms based on a system.

Safety as standard. The components in the Stairway/Platform System satisfy all current standards and the regulations of the accident insurance and prevention institutions in Germany. As a result, the Stairway/Platform System makes it incredibly easy for users to build structures that satisfy all the safety requirements and rules that apply to stairway design. Small number of components. The Stairway/Platform System is based on a small number of special components that are flexible in the way they can be used. This makes it much easier to reuse components. Consistent lightweight construction principles...

For maximum safety. The Stairway/Platform System makes it easier than ever to reach every part of a machine and work on various levels. Bridges, maintenance platforms for elevated sections of machinery and allround working platforms can all be built using the same system. Stairways and platforms can quickly become a safety hazard. Put one foot wrong and you can easily fall. This risk can be mitigated, but not completely eliminated. The consequences of a fall can also be mitigated. Even in the 1970s, statutory accident insurance and prevention institutions in Germany recorded 60,000 accidents...

All the components in the Stairway/Platform System are designed to make it much easier to build standard-compliant stairways and offer your staff the best protection possible. The table below contains an overview of the relevant guidelines, standards and recommendations. item will be happy to offer you advice for the design of your customised stairway!

For all scenarios: Stairways in four different pitches. Every task and every space is different. That is why the Stairway/Platform System allows users to choose between a comfortable climb and a space-saving design. The system can be used to build stairways in pitches of 30°, 38°, 45° and 60°. All solutions are individually configured and satisfy the most stringent safety requirements. Guard-rails and platforms can also be added to extend the stairway as appropriate. Load-carrying stairway Ergonomic stairway If a stairway is in frequent use or is to be used to transport consumables or other loads,...

Stairways Stairways from the ground to a platform Stairways from a platform to a platform Platforms Basic frames Floor surfaces Guard-rails Stanchions and foot-rails

Stairways from the ground to a platform. Stairway Assembly Sets GP are used as fasteners to connect the ground level to a platform made of Line 8 profiles. When combined with the stringer profile and steps, they can create stairways in four different pitches and any height. The steps can be installed in the appropriate depth for the relevant pitch.

■ Step Profile Bracket Set 320 (0.0.647.14) ■ Step Spacer Profile 24x8 (0.0.650.76) item Stairway Assembly Sets GP The Stairway/Platform System includes various Assembly Sets GP for different stairway pitches. Stringer profile The following profile is recommended as a stringer for use with all Stairway Assembly Sets: Note: You can find a formula for calculating the length of the stringer profile alongside the Stairway Assembly Sets GP on page 12. European Standard EN ISO 14122-3 requires an overlap of at least 10 mm on steps. This means that different step depths are required for different pitches....

Stairways from a platform to a platform. Stairway Assembly Sets PP are used as fasteners to connect two platforms made of Line 8 profiles. When combined with the stringer profile and steps, they can create stairways in four different pitches and any height. The steps can be installed in the appropriate depth for the relevant pitch.

■ Step Profile Bracket Set 320 (0.0.647.14) ■ Step Spacer Profile 24x8 (0.0.650.76) item Stairway Assembly Sets PP The Stairway/Platform System includes various Assembly Sets PP for different stairway pitches. Stringer profile The following profile is recommended as a stringer for use with all Stairway Assembly Sets: Note: You can find a formula for calculating the length of the stringer profile alongside the Stairway Assembly Sets PP on page 14. European Standard EN ISO 14122-3 requires an overlap of at least 10 mm on steps. This means that different step depths are required for different pitches....

Stairway Assembly Set GP ■ For connecting the floor to a Line 8 profile ■ Includes fastening materials ■ Profile 8 120x40 light is recommended for use as a stringer Length l of the stringer profile:

Stairway Assembly Set GP 30° 2 step angle brackets 30°, St, powder-coated RAL 9006 white aluminium 2 step angle brackets 60°, St, powder-coated RAL 9006 white aluminium 2 Profiles 120x40 light 160 mm, Al, anodized 2 Angle Brackets 8 40x40x40, St, bright zinc-plated 2 floor fastening plates, St, powder-coated RAL 9006 white aluminium 2 Floor-Fastening Sets M10x125, St, bright zinc-plated 18 hexagon screws ISO 4017-M8x25, St, bright zinc-plated 18 washers ISO 7089-8-200, St, bright zinc-plated 2 step angle brackets 38°, St, powder-coated RAL 9006 white aluminium 2 step angle brackets 52°, St, powder-coated...

Stairway Assembly Set PP ■ For connecting two different levels made of Line 8 profiles ■ Includes fastening materials ■ Profile 8 120x40 light is recommended for use as a stringer

itemStairway Assembly Set PP 30° 4 step angle brackets 30°, St, powder-coated RAL 9006 white aluminium 4 Profiles 120x40 light 160 mm, Al, anodized 4 Angle Brackets 8 40x40x40, St, bright zinc-plated 24 hexagon screws ISO 4017-M8x25, St, bright zinc-plated 24 washers ISO 7089-8-200, St, bright zinc-plated 4 step angle brackets 38°, St, powder-coated RAL 9006 white aluminium 4 Profiles 120x40 light 160 mm, Al, anodized 4 Angle Brackets 8 40x40x40, St, bright zinc-plated 24 hexagon screws ISO 4017-M8x25, St, bright zinc-plated 24 washers ISO 7089-8-200, St, bright zinc-plated 4 step angle brackets...

step depths Bracket Sets include fixings The depth of a step is determined by the Step Profile that is used. In the case of stairways with pitches of 30° or 38°, two Step Profiles 8 160 should be connected together using Step Profile Bracket Set 8 320. Step Profile 8 240 is ideal for 45° stairways. To ensure the minimum requirements are met for stairways that are being used by several people at the same time, item recommends a maximum width of 1200 mm. The two 5 mm-wide fastening brackets must be taken into account when calculating the overall width. Length l of the Step Profile: l = w - (2x5...