Welcome to item, where your ideas are worth it and innovation comes as standard. Every year, we release numerous new products – and each new product represents a promise. All these innovations open up new opportunities for your design and engineering work and give you even more freedom to meet your specific requirements. Discover more about new applications in mobile and stationary robotics, innovative room solutions for clean production and signalling products that use an intuitive web interface so you can customise signals in your production operations. Get inspired and get going – your ideas...

The highlights at a glance Robotics Work Bench System Mobile robotics (AGV/AMR) – Base Carts and Top Modules Lifting Columns for cobots Cable management using the Flexible Conduit Ergonomic information presentation Conveying technology Clean production Suspended Conveyor System with curves and shooters Centre drive for the Conveyor Belt System Building rooms with walk-on ceilings Integrated cable routing Quick-to-fit strip curtains Linear technology Linear Slide KRF and Range Extender Linear Units KLE as individual components Stepper motor with integrated control system DIN/AIN LED controller...

Robotics ■ Mobile robotics (AGV/AMR) - Base Carts and Top Modules ■ Lifting Columns for cobots

Automating intralogistics – you can with item Innovation that interlinks! The new item components and solutions for mobile robots offer a safe and reliable way to automate your production logistics operations. Base Carts connect driverless transport system (DTS) from various manufacturers to application-specific superstructures for your assembly line. Pallets, wire-mesh crates and small load carriers are moved around production plants, with mobile robots delivering them in racks and setting them down in storage areas. Mobile robot Base Cart Compatibility with the item Building Kit System ensures...

SAFELOG AGV M4 Max. payload: 750 kg Frame size: 1205x805 mm Max. payload: 750 kg Frame size: 1205x805 mm Max. payload: 300 kg Frame size: 782x805 mm Max. payload: 300 kg Frame size: 1205x805 mm Max. payload: 750 kg Frame size: 1205x885 mm Max. payload: 750 kg Frame size: 1757x885 mm Ready-to-use Base Carts Good to go – right away! The ready-to-use Base Carts from item save you a lot of time and effort on developing customised intralogistics solutions with driverless transport systems. The work platforms have been optimised for use with mobile robots from ABB, MiR and SAFELOG, factoring in specifications...

Components for custom Base Carts The item components for Base Carts give you everything you need to build custom work platforms for use with various mobile robots. Thanks to the modular nature of the solution, this base frame can be perfectly tailored to the dimensions and requirements of each model. These components were also used to create the ready-to-use Base Carts for robot manufacturer ABB and SAFELOG. On the one hand, Castor Adapter Profile 8 W120x100 makes it easier to fasten and position castors. On the other hand, it provides a secure, maintenance-friendly solution for connecting custom...

When working with driverless transport systems from Mobile Industrial Robots (MiR), Shaft Set D20 M8 ensures there is adequate clearance between the floor and work platform. Combining this with new Castor D100 swivel, heavy-duty and the corresponding Fastening Set creates the perfect symbiosis of mobile robot and intralogistics application. ■ Suitable for high loads on Base Carts Castor D100 swivel with double-brake, heavy-duty 0.0.723.53 ■ Double-brake locks wheel and swivel mechanism Fastening Set, MiR Base Cart, for Castor D100 swivel, heavy-duty 0.0.726.65 ■ For Base Carts compatible with...

High-performance Lifting Columns for cobots Expand the working range of your collaborative robots! New Lifting Column TCP/IP 24V is so strong and resistant to torsion that it can lift and lower a cobot and workpiece vertically during palletising operations. Thanks to the integrated controls, the Lifting Column can be actuated directly from the cobot as a seventh axis. Lifting Column Adapter Plate 8 200x200 ensures that cobots from all leading suppliers can be used with the Lifting Column. A Range Extender with a robust Linear Slide is also available to extend the working range horizontally. This...

itemComponents for stationary robotics Lifting Column Adapter Plate 8 200x200 can be used to connect cobots to Lifting Column TCP/IP 24V from item. Cobot models from ABB can be fastened directly via the Adapter Plate. All other robots can be screwed to the Adapter Plate using the relevant Robot Mounting Plate. The Plug-And-Play version of Lifting Column TCP/IP 24V includes all the necessary elements such as a power supply unit, Mounting and Adapter Plates, cables and a cable chain. By contrast, the Integrator Set version consists of the Lifting Column and the cables needed to integrate it into...

itemCompatibility with eobots Robot Mounting Plate

Conveying technology ■ Suspended Conveyor System with curves and shooters ■ Centre drive for the Conveyor Belt System

Release Unit 6, Carriage D37-32 Curve 30x22 R100 90° ESD Suspended Conveyor System More flexibility for suspended material supply! The 45° and 90° Curves for the item Suspended Conveyor System will guide Carriages to any point in a frame. Connecting Conveyor Rail Profiles with the Curves means the track can change direction, negotiate obstacles or be extended to increase its storage capacity. These curved segments are shaped so that Carriages cannot over-tilt when the incline is at a constant 3°. Even when moving at higher speeds, the Carriages stay on the track. When it comes to controlling...

itemSuspended Conveyor System components Variable use of the installation space The new Curves for the item Suspended Conveyor System connect Conveyor Rail Profiles so that the track for Carriages can be adapted to the space available in the frame. These ESD-safe curved segments, available in angles of 45° and 90°, create a safe transition between sections of track. Carriages safely absorb lateral forces as they pass through the curve. Release Unit 6, Carriage D37-32 can be used to build shooters for the Suspended Conveyor System. The Release Unit will allow Carriages to pass through it for as...