YOUR POWER TESTING SOLUTION ■ Industry ■ Server power supply ■Communication power supply ■ Energy storage system ■ Military & Aerospace ■ Car charger ■ Battery pack ■ Charging station

IT8900A/E series high performance high power DC electronic load provides three voltage ranges 150V/600V/1200V, stand-alone power from 2kW to 54kW. IT8900A/E series, with ultra-wide voltage and current range, controlled by an independent master unit. The power expands to 384kW by master-slave paralleling. Ultra-high power density, 6kW is with only 4U height. IT8900A/E series has eight (A series) / four (E series) working modes, faster loop response and current rising and falling speed, as well as dynamic mode, OCP test, OPP test, automatic test and battery test functions. Built-in CAN, LAN, GPIB,...

Your Power Testing Solution IT8900A/E Series High Power DC Electronic Load Application Virtual load testing of natural energy (solar battery array, wind power generation) Server power, high voltage UPS, communication power test A/D power supply and other power electronic components test DC charging station, car charger, power electronics and other tests Fuse and relay aging test Power battery, lead battery, fuel cell discharge test Intelligent manufacturing, industrial motor safety testing (such as AGV, robots, etc.) Industry (motors) Energy storage system Military industry & Aerospace Electronic...

Your Power Testing Solution IT8900A/E Series High Power DC Electronic Load Eight working modes Battery discharge function IT8900A series provides eight kinds of working modes such as CC, CV, CR, CP, CV+CC, CV+CR, CR+CC, CP+CC, which can adapt to the test requirements of various occasions. Among them, the CP mode is often used to UPS battery test, simulate the current change when the battery voltage is decaying. It can also be used to simulate the characteristics of the inputs of DC-DC converters and inverters. The CV+CC mode can be applied to the load simulation battery and test the charging...

Your Power Testing Solution IT8900A/E Series High Power DC Electronic Load Built-in communication interface IT8900A/E series electronic load is built-in LAN, USB, RS232, CAN, GPIB, analog interface, supports SCPI protocol. It is suitable for power expansion, computer or PLC remote control, system building and so on. Measure function IT8900A/E series provides the measurement of rising and falling time of voltage and current. The measurement accuracy is up to 10μs, which is comparable to the high precision oscilloscope. IT8900A/E series can be applied to measure the start-up and shutdown of power...

Your Power Testing Solution IT8900A/E Series High Power DC Electronic Load External analog control function IT8900A/E series electronic load has analog control interface, which can be used for industrial control or expanding load power by paralleling. When IT8900A/E is used for industrial control, using PLC output 0~10V to control the 0~100% full scale change of CC/CV of the load. Compared with the real-time control from PC, the response time is faster and up to 10μs, step time is <10ms, accuracy can reach 1%. At the same time, IT8900A/E also has the advantage that the number of steps is not...

1000 1200 Vin/V 25C ambient temperature 1 200V model power curve *1 Voltage/Current is not less than 10%FS (FS is full range) *2 Readback resistance range: (1/(1/R+(1/R)*0.01%+0.08),1/(1/R-(1/R)*0.01%-0.08) ) *3 Voltage/Current is not less than 10%FS *4 Loading current value is not less than 4%FS_CCH *5 The curve between rated input power and input voltage of 1200V model is shown in the right figure

This information is subject to change without notice. YOUR POWER TESTING SOLUTION Taiwan For more information, please contact ITECH. China TEL: +86-25-52415098 FAX: +86-25-52415268 E-mail: [email protected]