YOUR POWER TESTING SOLUTION Oscilloscope Function Adjustable Parameters CF/PF Simultaneously Displayed ITIliOAC/DC ELECTRONIC LOAD

IT8600 series AC/DC electronic loads has power range 0~14.4 kVA, power can extend up to 43.2KVA by paralleling, and adjustable frequency is 45 Hz ~ 450 Hz. The unique oscilloscope waveform display function of IT8600's can display input voltage & current as waveform. It is equipped with measurement modes for different parameters such as inrush current, peak value, effective value, PF (power factor). Voltage harmonics measurement capacity is up to 50th. The built-in GPIB, LAN and USB communication interfaces are for reliable and fast control. IT8600 is the perfect solution for testing UPS, inverters,...

Your Power Testing Solution IT8600 AC/DC Electronic Load Display Multiple Parameters Simultaneously IT8600 provides 7 inch LCD display screen, easy user interface. Give full consideration to engineers' requirements in different tests, IT8600 not only can display multiple parameters simultaneously,but also has diversified display modes for choice, such as waveform, histogram and list etc. Harmonic Measuring And Analysis Function IT8600 provides powerful data measurement function, which can not only support measurement of conventional parameters such as Vrms, Vpk, Vdc, Irms, Ipk, Idc, W, VA, VAR,...

Adjustable CF/PF Value IT8600 has CC, CR and CP operation modes. In CC and CP operation modes, PF or CF or both are available for programming. Power factor range is 0~1 lead or lag, CF setting range is 1.414~5, besides CF and PF, IT8600 also has various settings modes for choice to realize actual current simulation. Short circuit simulation function IT8600 AC/DC electronic load can simulate short circuit under DC load mode. The actual current value consumed under the short circuit state depends on the operating mode and current range of the current load. Users can press [Short] soft key to switch...

Current 0~20 Arms ,60 Apeak 0~20 Arms ,60 A peak 0~40Arms ,120Apeak CC Mode *1 Range 0.1~20 Arms Crest factor Range 1.414~5.0 1.414~5.0 1.414~5.0 (CP,CC mode) Resolution 0.005 0.005 0.005 Accuracy (0.5%/ Irms) + 1% FS (0.5%/ Irms) + 1 % FS ( 0 . 5 %*( 1+2/9 ) / Irms) + 1% FS Power factor Range 0~1 phase lead or lag 0~1 phase lead or lag 0~1 phase lead or lag Short-circuit simulation Use the CC mode under the maximum power or maximum working current *1 Typical value at 45 Hz-100 Hz *2 Resistance accuracy: ( 1/(1/R+(1/R)*0.2%+0.01),1/(1/R-(1/R)*0.2%-0.01) Test conditions: Voltage>10%FS, Current>10%FS...

Rated parameter Input voltage 50~420Vrms , 600V peak 50~420Vrms , 600V peak Short-circuit simulation Use the CC mode under the maximum power or maximum working current Meter (continue) S(VA), Q(VAR), P(W), Ip+, Ip-, Freq, THDv, CF, PF, R, FFT Interfaces GPIB- USB- LAN GPIB- USB- LAN GPIB- USB- LAN

Short-circuit simulation Use the CC mode under the maximum power or maximum working current *1 Typical value at 45 Hz-100 Hz *2 Resistance accuracy: ( 1/(1/R+(1/R)*0.2%+0.01),1/(1/R-(1/R)*0.2%-0.01) Test conditions: Voltage>10%FS, Current>10%FS *3 Operating temperature: 0-40 C, Temperature coefficient:100ppm/C

YOUR POWER TESTING SOLUTION This information is subject to change without notice. For more information, please contact ITECH. Taiwan TEL: 03-668-4333 FAX:03-667-6466 E-mail: [email protected] China TEL:+86-25-52415098 FAX:+86-25-52415268 E-mail: [email protected]