IT8500+ Programmable DC Electronic Load Electronic Load IT8500+ Programmable DC Electronic Load IT8500+ series single channel programmable electronic load with high density, high resolution and high accuracy supports dynamic test function, automatic test function, etc., which is suited for applications in areas such as LED driver testing, switching power testing, battery performance testing, etc. IT8500+ also provides standard SCPI protocol to build intelligent test platform that is ideal for multiple industries. Battery test, lithium protection board test, power supply test, charger test, ATE, component test, etc. • Four operating modes: CV, CC, CR, CP • Battery test function, automatic test function, OPP test, OCP test function and CR-LED function • Dynamic mode up to 10kHz • Voltage measurement resolution up to 0.1mV / 0.1mA • Remote sense • Short circuit function • Current monitoring function • Power-off memory function • 100 groups memory capacity • Optional USB / RS232 / RS485 interface *IT8514B+, IT8514C+, and IT8516C+ are built-in RS232 and USB interface. For more information, please visit ITECH official website www.itechate.com Automatic Test Func IT8500+ supports two automatic test editing modes. One is special automatic test editing mode that can save up to 10 groups of test files, and the other is compatible with the IT8500 automatic test editing mode that can save up to 50 groups of test files, both of which can be called and tested at any time. Test operation is simple, the button can be completely locked to prevent accidental touch on the keyboard from affecting normal testing.

Constant Current (CC) In CC mode, the electronic load will sink a constant current regardless of the changes of input voltage. Constant Voltage (CV) In CV mode, the electronic load will attempt to sink enough current to control the source voltage to the programmed value. Constant Resistance (CR) In CR mode, the module will sink a current linearly proportional to the input voltage in accordance with the programmed resistance. Constant Power (CW) In CP mode, the electronic load will dissipate power in accordance with the programmed value. If input voltage increase, input current will decrease....

IT8500+ Programmable DC Electronic Load Electronic Load List Mode List mode allows you to generate a complex current sequence. Moreover, the mode change can be synchronized with an internal or external signal, to accomplish dynamic and precise test which can save cost for users. Users can edit step value, pulse width and slope sequence and meet a complex test request. A list file includes following parameters: file name step counts (range 2-84), time width of single step (0.00005s-3600s), step value and slope. The edited list file can be recalled easily. The DC load provides 7 nonvolatile registers...

CV mode CC mode CR mode CP mode Dynamic mode Min response time Readback Voltage Readback Current Readback Power Voltage Current Power MOV Range Resolution Accuracy Range Resolution Accuracy Range Resolution Accuracy Range Resolution Accuracy T1&T2 Accuracy Up/dcwn slope Range Resolution Accuracy Range Resolution Accuracy Range Resolution Accuracy Over power protection Over current protection Over voltage protection Over temperature protection Short circuit CC CV CR Input terminal impedance Size(W*H*D) *This information is subject to change without notice IT8511A+ / IT8512A+/ IT8511B+ / IT8512B+...

ITECH ELECTRONICS Your Power Testing Solution Electronic Load Rated ( 0~40 °C) CV mode CC mode CR mode CP mode Dynamic mode Min response time Readback Voltage Readback Current Readback Power Voltage Current Power MOV Range Resolution Accuracy Range Resolution Accuracy Range Resolution Accuracy Range Resolution Accuracy T1&T2 Accuracy Up/down slope Range Resolution Accuracy Range Resolution Accuracy Range Resolution Accuracy Measuring range Over power protection Over current protection Over voltage protection Over temperature protection Protected range Input terminal impedance Size(W*H*D) Rated...

Your Power Testing Solution IT8500+ Programmable DC Electronic Load IT8500+ Specifications Rated ( 0~40 X) CV mode CC mode CR mode CP mode Dynamic mode Min response time Readback Voltage Readback Current Readback Power Voltage Current Power MOV Range Resolution Accuracy Range Resolution Accuracy Range Resolution Accuracy Range Resolution Accuracy T1&T2 Accuracy Up/down slope Range Resolution Accuracy Range Resolution Accuracy Range Resolution Accuracy Over power protection Over current protection Over voltage protection Over temperature protection Short circuit Input terminal impedance Size(W*H*D)...