Overview

This document provides detailed technical specifications and configurations for turbine agitators used in industrial mixing applications. It includes dimensions, motor types, turbine materials, shaft sizes, support types, and performance parameters.

1. Dimensions and Models

• Available agitator lengths range from 620 mm (24.5 in) to 2000 mm (79 in).
• Model codes follow a structured format indicating series, motor type, length, turbine diameter, and material.
• Typical agitator diameters (turbine sizes) include Ø60 mm, Ø90 mm, Ø113 mm, Ø120 mm, Ø130 mm, Ø150 mm, and Ø180 mm.

2. Motor Specifications

• Motors are available in various configurations: 3-phase (3ph) and single-phase (1ph), with power ratings from 67W to 900W.
• Operating speeds typically range from 950 rpm to 1650 rpm, with some models at 1400 rpm or 1100 rpm.
• Voltage and frequency options include 50Hz and 60Hz, as well as 12V DC for low-power models.
• Motor frame sizes vary (T56, T63, T71, T80) depending on power and application.

3. Turbine Materials and Types

• Turbines are identified by codes such as T06, T09, T11, T12, T13, T15, T18 indicating diameter in mm.
• Materials include polypropylene (PP), polyethylene (PE), and stainless steel (AISI 304).

4. Shaft and Support Options

• Shaft diameters offered are Ø15 mm, Ø20 mm, and Ø25 mm.
• Support types include flange (brida/briglia) and clamp (pinza/pinze) options for mounting.

5. Performance Parameters

• Flow rates and agitation capacities are provided in cubic meters per hour (m3/h) and gallons per minute (gpm), with typical values ranging from 0.15 m3/h (40 gpm) to 10 m3/h (2600 gpm) depending on model.
• Agitation power and efficiency vary with motor and turbine size, with larger turbines and motors delivering higher flow and agitation.

6. Model Examples

• 70-SB-A2000-T18P: 3ph, 550W, 950 rpm, 2000 mm length, 180 mm turbine diameter.
• 70-L_-A1500-T13P: 3ph, 900W, 1650 rpm, 1500 mm length, 130 mm turbine diameter.
• 70-PB-C0620-T06P: 3ph, 67W, 1400 rpm, 620 mm length, 60 mm turbine diameter.

7. Contact Information

Manufacturing and sales offices are located in Spain (Barcelona and Sevilla) and the USA (Fresno, CA). Contact details include phone and fax numbers, as well as email ([email protected]) and website (http://www.itc.es).

Critical Information Summary

• Selection of agitator depends on required length, motor power, turbine diameter, and material compatibility.
• Multiple motor and frequency options allow adaptation to different power supplies and operational needs.
• Support and shaft options provide flexibility for installation and maintenance.
• Performance data assists in matching agitator models to process flow and agitation requirements.