*mydirectindustry

Resins pumps

Product catalog summary

Overview: The document provides technical specifications and descriptions for polyurethane injection pumps, specifically models S35 PU, GSF 35 PU, DP 40-PU, and GX 45-PU. These pumps operate on the principle of pressure intensification using a pneumatically driven piston system.

Specifications:

Pneumatic Pressure Multiplication: The pressure is intensified based on the ratio between the low-pressure drive zone and the high-pressure pumping zone. Ratios are 1:34 for S35 PU, 1:40 for GSF 35-2PU, 1:41 for DP 40 PU, and 1:45 for GX 45 PU.
Construction: The pumps feature a pneumatic piston connected to two high-pressure pumping pistons via a central shaft. The piston rods are made of high-tensile stainless steel, ensuring durability. Valve seats are constructed from wearproof quenched steel, and sealings are made from UHMWPE special material.

Technical Data:

Air Piston Diameter: Ranges from 125 mm to 300 mm depending on the model.
Piston Stroke: 105 mm for all models.
High-Pressure Piston Diameter: Varies from 15 mm to 33 mm.
Max Working Pressure: Ranges from 150 bar to 200 bar.
Max Actuating Pressure: 5.8 bar to 10 bar.
Max Flow Rate: From 5.5 l/min to 25 l/min.
Dimensions and Weight: Length ranges from 630 mm to 1000 mm, depth from 320 mm to 470 mm, height from 200 mm to 490 mm, and weight from 28 Kg to 120 Kg.

Contact Information: Italswiss Engineering S.r.l, Strada Romana di Sotto, 27 – I -28877 Ornavasso (VB), Tel: 0039 0323 837 116, Fax: 0039 0323 835 369, Email: [email protected], Web: www.italswiss.net

Catalog excerpts

S35PU - GSF35 - GX45 - DP40 Pompe iniezione poliuretano Polyurethane injection pumps

Open the catalog to page 1

Le pompe per iniezioni S35 PU, GSF 35 PU, DP 40- The S35 PU, GSF 35-2 PU, DP 40-PU and GX 45-PU PU e GX 45-PU sono costituite da un pistone pressure injection pumps are pneumatically driven, pneumatico funzionante sul principio dell’intensi- double acting piston pumps operating according ficazione di pressione. to the pressure intensification principle. La pressione pneumatica viene moltiplicata in base al rapporto tra l’area di azionamento (Bassa pressione) e l’area di pompaggio (Alta pressione), che nel modello S 35 PU è di 1:34, nella GSF 35– 2PU è di 1:40, nella DP 40 PU è di 1:41 e nella...

Open the catalog to page 2