*mydirectindustry

DRAGO

Product catalog summary

Specifications
The Drago grout pump is designed with dimensions of 1800 mm in length, 55 mm in width, and 50 mm in height, weighing a total of 95 kg. It offers a speed range from a minimum of 140 rpm to a maximum of 400 rpm. The pump is available in various models with different flow rates and maximum pressures: MP 2 (140-400 l/h, 60 bar), MP 3 (435-1250 l/h, 70 bar), MP 7 (560-1600 l/h, 80 bar), MP 8 (805-2300 l/h, 60 bar), and MP 13 (1260-3600 l/h, 30 bar).

Power Supply and Activation
The Drago injector is available in both electric and hydraulic versions. The electric version features a 4.0 kW motor with a speed range of 140/400 rpm, while the hydraulic version operates at 30 l/min with a pressure range of 120-150 bar, and 50 l/min with the same pressure range. The power supply for the electric version is 380 V / 50-60 Hz, requiring a 3 x 16 A / 5-pole connection, while the hydraulic version uses a 12 V battery and 220 V supply.

Design and Features
The Drago injector was developed after a thorough analysis of the needs of companies using cement mortar injectors, particularly for drilling bars. Its reduced height makes it easy to transport and handle. The motor speed can be adjusted using a frequency inverter, allowing for a speed range from 140 rpm to 400 rpm. The central body includes two 2" inlet connections for easy attachment to agitators and a 1" quick-release outlet connection. Additionally, the Drago injector can be equipped with a hydraulic motor and remote control.

Contact Information
Italswiss Engineering S.r.l., Strada Romana di Sotto, 27 – I -28877 Ornavasso (VB), Tel: 0039 0323 837 116, Fax: 0039 0323 835 369, Email: [email protected], Web: www.italswiss.net

Catalog excerpts

Iniettore DRAGO Drago grout pump

Open the catalog to page 1

Portata minima/ Min. flow rate Portata massima/Max. flow rate Pressione massima/Max. pressure Dimensioni/Dimensions Lunghezza/Length Peso totale/Total weight Dimensioni pannello di controllo/ Power supply dimensions

Open the catalog to page 2

L’iniettore Drago nasce dopo un’accurata analisi delle esigenze delle imprese che utilizzano gli iniettori di malte cementizie in particolar modo per la messa in opera delle barre perforanti. Grazie all’altezza contenuta, l’iniettore Drago è estremamente facile da trasportare e da maneggiare. E’ possibile cambiare la velocità del motore elettrico servo ventilato attraverso un variatore di frequenza che permette di aumentare il numero di giri, passando da un minimo di 140 rpm fino ad un massimo di 400 rpm. Il corpo centrale è fornito di due raccordi di entrata dal diametro di 2", in modo da essere...

Open the catalog to page 3