*mydirectindustry

7CMT1A

Product catalog summary

Introduction:
This document is a user guide for the 7CMT1A actuator control card, which is used to control actuators with mechanical end-switches and ammeter protection.

Specifications:

Power Supply: 24VAC
Output Voltage: 24VDC
Max Current: 16A
Input Fuse: 16A
Relay: 250VAC / 28VDC - 14Am
Size with Base: 100x95x50 mm (optional)
Connector Power: Faston 6.3mm
Logic Connector: Joint connector 100x70x35 mm

Features:

The 7CMT1A can drive an AO-1 actuator or less in both directions, with or without mechanical end-switches.
The ammeter protection stops the motor when it reaches the maximum or minimum length.
Direction control is managed by two normally open (n.o.) switches that control the directional relays.

Installation:

Follow the wiring diagram for installation.
Use two buttons or a 3-way selector (ON/OFF/ON) for direction control.

Operation:

The actuator control card manages the reversal of motion using relays.
The motor stops using two limit switches with normally closed (n.c.) contacts.
To reset the ammeter protection, open both directional switches for more than 0.5 seconds.

Warnings:

Ensure proper wiring as per the diagram to avoid malfunction.

Catalog excerpts

SISTEMI ELETTRONICI Via Gasdotlo, 65/8 - 3607B Valdagno (Vicenza) Italy E-mail: [email protected] - Web: wwwitalseasrl.it Capitals Sociale Euro 78,000.00 • RE.A. n, 188095/VI ACTUATOR CONTROL CARD - MANUALE D'USO - - USER'S GUIDE-

Open the catalog to page 1

AZIONAMENTO CMT1 PER ATTUATORE 24V CON FINECORSA CMT1:ACTUATOR CONTROL CARD WITH MECCHANICAL END-SWITCHES. 1 ITALIANO / INGLESE CARATTERISTICHE / FEATURS VALORE / VALUE Alimentazione / Power supply Tensione d'uscita / Output voltage Corrente massima motore bloccato / max current Fusibile / Input fuse Relè / Relais Dimensioni / Size Dimensioni con base di fissaggio / Size with base (optional cod.8CMT1KIT) Collegamento parte di potenza / Connector power Collegamento parte logica / logic connector 100x70x35 (mm) 100x95x50 (mm) faston 6.3mm connettori estraibili / joint connector CARATTERISTICHE:...

Open the catalog to page 2

AZIONAMENTO CMT1A PER ATTUATORE 24V CON AMPEROMETRICA E FINECORSA CMT1A : ACTUATOR CONTROL CARD WITH AMMETER PROTECTION AND END-SWITCHES ITALIANO / INGLESE VALORE / VALUE Alimentazione / Power supply 24Vac - 50/60Hz Tensione d'uscita / Output voltage 24Vdc Corrente massima motore bloccato / max current 16A Amperometrica / Ammeter protection 4 - 16A Fusibile / Input fuse 16A Relè / Relais 250Vac / 28Vdc - 14Am Dimensioni / Size 100x70x35 (mm) Dimensioni con base di fissaggio / Size with base (optional cod.8CMT1KIT) 100x95x50 (mm) Collegamento parte di potenza / Connector power faston 6.3mm Collegamento...

Open the catalog to page 3

7CMT1A

7CMT1A

Catalog excerpts

All ITALSEA catalogs and technical brochures