7CFB0000

7CFB0000
1 / 10 PagesView full catalog

7CFB0000

Product catalog summary
Introduction
The CFB0000 is a multifunction controller designed for battery-powered scrubber machines (24/36V). It is fully programmable, offering flexibility and robust diagnostics to identify connection issues and failures. The controller uses solid-state MOSFETs for motor power stages, eliminating the need for electromechanical contacts, thus extending the lifespan. Safety features include soft start, current limitation, and overload protection. It supports both automatic cycles and manual operations, adhering to key EC standards.

Features
  • Power Supply: Battery 24 – 36 V
  • Brushes Motor Rated Current: 50A (80A peak)
  • Vacuum Motor Rated Current: 25A (50A peak)
  • Actuators: 5A (10A peak)
  • Pump Motor: 2A (10A peak)
  • Operating Temperature: -10°C to 40°C
  • Max Heatsink Temperature: 90°C

Safety
  • Output Short Circuit Protection
  • MOSFET Short Circuit Protection
  • Thermal Protection
  • Low Voltage and Overvoltage Protection
  • Reverse Battery Protection
  • Onboard Main Contactor (80A – 240A peak) or External

Programmable with handheld programmer 7PROGLCD.

Installation
Install the controller in a protected area to avoid mechanical damage, water, and dirt. Secure it on a metal surface, preferably aluminum, to enhance heat dissipation. If thermal protection frequently activates, consider adding a heatsink or fan.

I/O Connectors
  • Power Screws: Negative DC input, Positive output for motors, Negative outputs for brushes and vacuum motors.
  • Connector J1: Squeegee Actuator (6v Molex)
  • Connector J3: Optional Actuator (6v Molex)
  • Connector J4: TG (2v Molex)
  • Connector J5: PROG (4v Molex)
  • Connector J6: TAST (4v Molex)
  • Connector J7: Direct Keyboard Input (16v Molex)
  • Connector J8: Devices (8v Molex)
  • Connector J9: Optional E.V. Pump (6v Molex)
  • Connector J10: Brush Actuator (6v Molex)
See more

Catalog excerpts

7CFB0000-1

SISTEMI ELETTRONICI Via Gasdotto, 65/B • 36078 VaWagno (Vicenza) Italy E-mail: italsea*italseasrl.it - Web: wiwj.rtalsoasrl.il Capitals SocialB Euro 78,000,00- FLEA n, 168095/VI PROGRAMMABLE FUNCTION CONTROL CARD FOR SCRUBBER -USER GUIDE-

 Open the catalog to page 1
7CFB0000-2

aaaaaaaaaaa INTRODUCTIONaaaaaaaaaaaaaaaaaaaaaaaaaaaabbbbbbbb FEAUTURES MECHANICAL DRAWING I/0 CONNECTOR Power screws

 Open the catalog to page 2
7CFB0000-3

- INTRODUCTION The CFB0000 is a family of multifunction controller for scrubber machines powered by battery 24/36V. It is completely programmable to assure flexibility for the user and a powerful diagnostic could help the operator to find wrong connections and failures. The power stage for the motors have solid state MOSFET configuration that eliminates electromechanical contacts (contactors and relays) to guarantee a longer life. The safety functions of the motors are obtained by mean of the soft start operation, current limitation and overload protection. Automatic cycles or manual operations...

 Open the catalog to page 3
7CFB0000-4

- MECHANICAL DRAWING –

 Open the catalog to page 4
7CFB0000-5

Locate the controller in a place protected against mechanical abuse, water and dirty. Fix it with all the screws on a metal surface (aluminum if possible) to reduce the heath and so for longer period of work. If during the standard operations the thermal protection is activated very often an additional heath-sink or fan is requested to assure longer periods of work.

 Open the catalog to page 5
7CFB0000-6

POWER SCREWS - B: Negative DC power supply input (M6 screw) +OUT: Positive Output for brushes and Vacuum Motors (M6 screw) -BR: Negative Output for Brushes Motor(-s) (M6 screw) -VA: Negative Output for Vacuum Motor (M6 screw) EXTERNAL MAIN CONTACTOR External main Power fuse ONBOARD MAIN CONTACTOR

 Open the catalog to page 6
7CFB0000-7

CONNECTOR J1: SQUEGEE ACTUATOR 6v Molex connector (Molex p/n 39012160, contacts p/n 39000038) Squeegee Act. Down Position switch Squeegee Act. Up Position switch CONNECTOR J3: OPTIONAL ACTUATOR 6v Molex connector (Molex p/n 39012160, contacts p/n 39000038) Optional Act. Down Position switch Optional Act. Up Position switch

 Open the catalog to page 7
7CFB0000-8

2v Molex connector (Molex p/n 39013022, contacts p/n 39000038) External Main Contactor Coil 4v Molex connector (Molex p/n. 39013042, contacts p/n. 39000038) 4v Molex connector (Molex p/n. 39013042, contacts p/n. 39000038)

 Open the catalog to page 8
7CFB0000-9

CONNECTOR J7: DIRECT KEYBOARD INPUT 16v Molex connector (Molex p/n 39012160, contacts p/n 39000038) _ Brake switch Brushes Act move UP switch Brushes Act move DOWN switch — Squeegee Act move UP switch '— Squeegee Act move DOWN switch ON/OFF Vacuum switch ON/OFF Brushes switch Brushes Overposition switch Click-off switch Stop Position switch ON/OFF Water pump switch '— Water Pump "UP" external speed ref. Water Pump "DOWN" external speed ref. 8v Molex connector (Molex p/n 39012080, contacts p/n 39000038) <^ Brushes Pressure Analog input <^ Water Tank Analog Level input <^ Traction Motor Voltage...

 Open the catalog to page 9
7CFB0000-10

6v Molex connector (Molex p/n 39012160, contacts p/n 39000038) CONNECTOR J10: BRUSH ACTUATOR 6v Molex connector (Molex p/n 39012160, contacts p/n 39000038) Brushes actuator: extraposition switch Brushes actuator: work position switch Brushes actuator: stop position switch Brushes Actuator Motor

 Open the catalog to page 10
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.