IntellIgent transmItter wIth DIgItal InDIcatIon
1Pages

{{requestButtons}}

Catalog excerpts

IntellIgent transmItter wIth DIgItal InDIcatIon - 1

Intelligent Transmitter with Digital Indication rs485-bus-interface LEO 3 is a micro-processor based transmitter with digital double-display for pressure (top of display) and for the analog output signal (bottom display). The display is powered from the 4…20 mA current loop. The following functions can be executed with the front keys: MAX/MIN Activating the right key brings the Max.- and Min.-values to the lower display. With RESET, the Max.- and Min.-values are set to actual. The zero is set to the applied pressure. Factory zero setting will be restored. The pressure values can be displayed in the following units: bar, mbar/hPa, kPa, MPa, PSI, kp/cm2. Programming the analog output via the front keys OUTP SETT In this sub-menu the analog output can be configured within the pressure range. ZERO Executing ZERO when pressure is applied sets the analog output to 4 mA. Executing FS when pressure is applied sets the analog output to 20 mA. FACT SETT The analog output signal is set back to factory settings. Scope of delivery Cable plug for Binder 723 Optional accessories Protective rubber covering, K114-B interface converter PC-Software Pressure and temperature readings can be displayed and recorded on PC or Laptop with help of the software ControlCenterSeries30 (CCS30) and a seriel interface cable. The software also enables configuration of the analog output scaling and zero point settings. The Keller-Bus protocol and programming examples in various programming languages are available. This allows very quick and easy implementation in customer software applications. Up to 128 devices can be connected together into a KELLER Bus-system. Overpressure 8 20 Resolution Pressure Display (LCD) 1 2 Resolution Pressure via Interface 0,0125 %FS Accuracy RT (room temperature) ** Total Error Band (0…50 °C) Storage Temperature / Operating temperature Compensated Temperature Range * Supply Output Interface Measuring Rate Display Rate Pressure Connection * Electrical Connection * Protection Diameter x Height x Depth / Weight ≤ 0,1 %FS ≤ 0,2 %FS -10…60 °C / 0…50 °C 0…50 °C 8…28 VDC 4…20 mA (2 wire) / RS 485 RS 485 (KELLER-Bus) up to 90 times/sec. 2 times/sec. G1/4” Binder 723 (back entry) IP65 76 x 125 x 50 mm / ≈ 210 g *Options: others Pressure Ranges, Temperature Ranges, Pressure Connections, Electrical Connections **Includes Linearity + Repeatability + Hyst

Open the catalog to page 1

All Italmanometri S.r.l catalogs and technical brochures

  1. CS-PT110/111

    2 Pages

  2. ECO 2

    1 Pages

  3. dV-2 PS

    1 Pages

  4. LEX 1

    2 Pages

  5. LEO 3

    1 Pages

  6. LEO 5

    1 Pages

  7. LEO 2

    1 Pages

  8. S 50.16

    1 Pages

  9. Digi-10

    2 Pages