- Catalogs
- Italgroup S.r.l.
- IAMD Series
IAMD Series
IAMD Series
The IAMD series motors are radial piston hydraulic motors designed for low speed and high torque applications. They are suitable for marine equipment, winches, and agricultural machinery, featuring high efficiency, smooth operation at low speeds, high starting torque, and low maintenance requirements.
The catalogue provides specifications for different motor sizes, including displacement, theoretical torque, maximum continuous pressure, speed, and power. For instance, the IAMD 300 H2 has a displacement of 314 cc and a theoretical torque of 5 Nm/bar.
Recommended hydraulic oils should have a minimum viscosity index of 95 and anti-wear additives. The optimal working temperature should not exceed 70°C, with specific limitations for fire-resistant oils.
Filtered oil is essential for hydraulic systems, requiring 25 μm filtration, or 10 μm for closed circuits. Oxidation increases with temperature, affecting fluid performance.
An interchangeability chart and ordering code guide are provided to specify motor configurations and features.
Regular oil analysis is crucial, focusing on viscosity, oxidation, water content, additives, and contamination. Immediate replacement is necessary if the oil is exhausted.
Proper motor filling with hydraulic fluid before start-up is essential. Leakage line pressure should not exceed 10 bar.
Flushing ports should be positioned at the highest point, with specific flow and viscosity requirements.
The standard shaft seal is made from SIMRIT® materials, suitable for temperatures from -40°C to +160°C.
Proper alignment and secure mounting are critical. The motor should be filled with oil before starting, and high-speed operations should be avoided during cold start-ups.
Motors should be packed and stored securely, with appropriate tools used during handling to prevent damage.
Motors can be stored safely for 4-6 months at temperatures between -15°C and +55°C. For longer storage, fill the motor with hydraulic oil and seal it.
Maintenance should be performed by trained personnel, with minimal requirements if used according to specifications.
Components are made from materials like steel, cast iron, bronze, PTFE, and elastomers for durability.
Bearing life is influenced by various factors, and creep speed can be managed with negative brakes.
Options include marine painting, speedy-sleeves, high-pressure shaft seals, and counterclockwise rotation.
Common issues like excessive noise and overheating are addressed with potential solutions.
Specifications for the IAMD H2 series include displacement, torque, pressure, speed, power, and temperature range.
Conversion tables for various units are provided for reference.
Technical specifications for Italgroup's IAMD H2 and H3 series include displacement, specific torque, and pressure parameters.
Diagrams illustrate operational capabilities under various conditions, emphasizing ideal fluid conditions.
Flushing or changing the ISO oil grade is advised if working temperatures exceed recommended levels.
A detailed breakdown of components and configurations is provided for the IAMD series.
Drawings detail mounting face dimensions and port sizes for proper installation.
Tables provide technical data, and graphs illustrate performance under different conditions.
The document is a technical catalogue for Italgroup S.r.l.'s IAMD H3 and H4 series hydraulic motors.
The IAMD H3 series ordering code specifies interchangeability and other features.
The IAMD H4 series motors are detailed with specifications like displacement and torque.
Drawings provide dimensions and mounting instructions for various models.
Diagrams illustrate operational capabilities under different conditions.
Italgroup reserves the right to modify specifications without notice.
Specifications for various hydraulic motors in the IAMD series are provided.
Operational guidelines specify continuous and intermittent operation conditions.
Diagrams illustrate relationships between pressure, leakage, and efficiency.
A detailed ordering code system specifies motor configurations.
Drawings detail dimensions and mounting specifications.
Adherence to operational limits and regular maintenance is recommended.
Specifications for various hydraulic motors, including models IAMD H5 and H5/S, are provided.
Details on mounting faces and shaft dimensions are provided.
Diagrams illustrate operational capabilities under various conditions.
Recommendations for maintaining optimal performance are provided.
Disclaimers state that data is for descriptive purposes only.
Specifications for the IAMD H6 hydraulic motors are provided.
Diagrams illustrate continuous and intermittent operation conditions.
Guidelines emphasize not exceeding maximum continuous power without flushing.
An ordering code structure specifies different features and configurations.
Disclaimers highlight the prohibition of unauthorized reproduction.
The document is a technical catalogue for the IAMD H8 series hydraulic motors.
Specifications for the IAMD H8 series motors are provided.
Diagrams illustrate operational capabilities under various conditions.
A structured format for specifying motor configurations is provided.
Installation drawings and shaft specifications are provided.
Specifications for motor distributors are included.
Disclaimers emphasize that data is for descriptive purposes only.
Specifications for the RVDAP 90 double relief valve with flushing are provided.
Graphs illustrate pressure rise and flushing cartridge characteristics.
A code system for ordering valves is provided.
Countries where the products are available are listed.
Italgroup reserves the right to modify specifications without notice.
Catalog excerpts
Single displacement hydraulic - Heavy duty Single displacement hydraulic motors – Heavy duty
Open the catalog to page 1
All partial or total reproduction and copy without written authorization of Italgroup S.r.l. is strictly forbidden. ©2016 ITALGROUP S.R.L. - ALL RIGHTS RESERVED - COMPANY WITH QUALITY SYSTEM
Open the catalog to page 2
ITALGROUP MOTORS IAMD SERIES TECHNICAL CATALOGUE GENERAL INDEX FORMULAS INTRODUCTION - GENERAL INFORMATION TECHNICAL DATA INTERCHANGEABILITY CHART IAMD ORDERING CODE HYDRAULIC FLUID RECOMMENDATIONS DRAIN RECOMMENDATIONS STANDARD SHAFT SEAL FEATURES MOTOR INSTALLATION AND STARTUP MOTOR HANDLING AND STORAGE MAINTENANCE OPERATION INSTRUCTION AND ADVICES SPECIAL FEATURES TROUBLESHOOTING UNIT CONVERSIONS IAMD H2 IAMD H3 IAMD H4 IAMD H45 IAMD H5 IAMD H55 The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristics in legal sense....
Open the catalog to page 3
ITALGROUP MOTORS IAMD SERIES TECHNICAL CATALOGUE GENERAL INDEX IAMD H6 IAMD H7 IAMD H8 MOTOR DISTRIBUTORS TACHOMETERS SPLINED BILLET ADAPTOR FLANGES VALVES CONTACT US - REACH US The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristics in legal sense. Italgroup S.r.l. reserves the right to implement modifications without notice. All partial or total reproduction and copy without written authorization of Italgroup S.r.l. is strictly forbidden.
Open the catalog to page 4
Torque [Nm] = Specific torque [Nm/bar] * Pressure [bar] Displacement [cc/Rev] * Pressure [bar] Displacement [cc/Rev] Displacement [cc/Rev] * Speed [rpm] The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristics in legal sense. Italgroup S.r.l. reserves the right to implement modifications without notice. All partial or total reproduction and copy without written authorization of Italgroup S.r.l. is strictly forbidden.
Open the catalog to page 5
INTRODUCTION - GENERAL INFORMATION Carefully read the use and maintenance manual before start-up the motor. The use and maintenance manual must be placed near to motor installation location in order to guarantee operators easy access to the instruction manual. For further information please contact Italgroup. Motor description IAMD series motors are radial piston hydraulic motors (generally indicated as LSHT motors, low speed high torque motors) with a rotating shaft (1) and a stationary housing (2). The pistons (4) are located radially and the working fluid provide the mechanical force that...
Open the catalog to page 6
INTRODUCTION - GENERAL INFORMATION Hydraulic motors of the IAMD series are single displacement crankshaft radial piston motors. Thanks to great variety of accessories IAMD series can be used in a wide range of applications such as: • Marine equipments • Winches • Offshore equipments • Conveyors • Injection moulding machines • Steel bending machines • Fork lifts trucks • Skid steer loaders • Dumpers • Agricultural and forestry machines • Municipal vehicles • Airport machinery Product Features: High volumetric and mechanical efficiencies Very smooth running at low speeds High starting torque /...
Open the catalog to page 7
MOTOR TECHNICAL DATA H YDRA ULtC HO TORS Motor Size Displacement Theoretical Max Max cont. Peak spe- Max cont. Max cont. Dry weight torque cont. speed ed (**) power (*) power pressure with The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristics in legal sense. Italgroup S.r.l. reserves the right to implement modifications without notice. All partial or total reproduction and copy without written authorization of Italgroup S.r.l. is strictly forbidden.
Open the catalog to page 8
MOTOR TECHNICAL DATA H YDRA ULtC US TOPS Size Displacement Theoretical For all motors: - (*) For motor operation with a continuous duty cycle at maximum continuous power - Hydrostatic test pressure: 420 bar the flushing is usually required. For more information please contact our technical - Refer to motor performance dia- department. grams for more information - (**) Do not exceed maximum continuous power with flushing. The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristics in legal sense. Italgroup S.r.l. reserves...
Open the catalog to page 9
INTERCHANGEABILITY CHART Interchangeability chart Italgroup motor code Cross reference motor code The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristics in legal sense. Italgroup S.r.l. reserves the right to implement modifications without notice. All partial or total reproduction and copy without written authorization of Italgroup S.r.l. is strictly forbidden.
Open the catalog to page 10
IAMD - ORDERING CODE H YDRA ULtC US TOPS internal code The data specified into the catalogue are for product description purpose only and must not be interpreted as warranted characteristics in legal sense. Italgroup S.r.l. reserves the right to implement modifications without notice. All partial or total reproduction and copy without written authorization of Italgroup S.r.l. is strictly forbidden.
Open the catalog to page 11
H YDRA ULtC HO TOPS HYDRAULIC FLUID RECOMMENDATIONS Fluid selection In general, we recommend the use of hydraulic oils with minimum viscosity index of 95, with anti-wear additives (ISO HM and HV). Once normal wor- king temperature is reached, the drain oil viscosity must be at least 35-40 cSt, preferably in the range from 40 to 60 cSt. HE oils (ecological fluids) are allowed, but must be used with particular attention, because them can influence the motor seals compatibility, and can reduce motor performances and life. Please contact us in case of HE oils usage. Optimal viscosity se- Referring...
Open the catalog to page 12
HYDRAULIC FLUID RECOMMENDATIONS Hydraulic systems oil must always be filtered. The choice of filtration grade derives from needs of service life and money spent. In order to obtain stated service life it is important to follow our recommendations concerning filtration grade. When choosing the filter it is important to consider the amount of dirt particles that filter can absorb and still operate satisfactorily. For that reason we recommend filters showing when you need to substitute filtering cartridge. · 25 μm filtration required in most applications · 10 μm filtration in closed circuit applications...
Open the catalog to page 13All Italgroup S.r.l. catalogs and technical brochures
HC Series114 Pages
G&GD Series24 Pages
PG Series - Planetary Gearbox264 Pages
W series - Wheel Motors154 Pages
- Flap valve
- Check valve
- Planetary gearbox
- Coaxial gearhead
- Gearbox for industrial applications
- Single-stage gearhead
- Multi-stage gearhead
- Electric motor gearhead
- Modular gearhead
- Flange check valve
- Machinery gear reducer
- Hydraulic check valve
- Flow divider
- Fixed-displacement hydraulic motor
- Hydraulic flow divider
- Industrial hydraulic motor
- Compact hydraulic motor
- High-pressure hydraulic motor