SPECIFICATIONS Sensitivity, ± 5%, 25°C 100 mV/g Acceleration range, VDC > 25 V 80 g peak Transverse sensitivity, max 5% of axial Key features Power requirement: Voltage source 18 - 30 VDC Current regulating diode 2 - 10 mA • Low profile • API 670 compliant • Manufactured in ISO 9001 facility Electrical noise, equiv. g: Broadband 2.5 Hz to 25 kHz 700 pg Output impedance, max Bias output voltage Grounding Temperature range Vibration limit Shock limit Electromagnetic sensitivity, equiv. g, max Sealing Base strain sensitivity, max Sensing element design Weight Case material Mounting Output connector Recommended cabling 100 Q 12 VDC case isolated, internally shielded -55° to +120°C 500 g peak 5,000 g peak 70 pg/gauss hermetic 0.002 g/pstrain PZT, shear 145 grams 316L stainless steel 1/4-28 captive hex head screw, 0.046" diameter safety wire hole 2 pin, MIL-C-5015 style J9T2A / J9F Accessories supplied: 1/4-28 captive hex head screw; calibration data (level 2) Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Istec | www.istec.com 99446 Rev.A 11/22