ISTACCSI10
1Pages

SPECIFICATIONS Sensitivity, ± 5%, 25°C Acceleration range Amplitude nonlinearity Frequency response: ± 10% ± 3 dB Resonance frequency Transverse sensitivity, max Temperature response: -55°C Key features Power requirement: Voltage source Current regulating diode Electrical noise, equiv. g: Broadband 2.5 Hz to 25 kHz 100 Hz 1,000 Hz Output impedance, max Bias output voltage Grounding Temperature range Vibration limit Shock limit, min Electromagnetic sensitivity, equiv. g, max Sealing Base strain sensitivity, max Sensing element design Weight Case material • Hazardous area certified -intrinsically safe • API 670 compliant • Manufactured in ISO 9001 facility 700 pg 10 pg/VHz 5 pg/VHz 5 yg/VHz 100 Q 12 VDC case isolated, internally shielded -55° to +120°C 500 g peak 5,000 g peak 70 pg/gauss hermetic 0.002 g/pstrain PZT ceramic / shear 145 grams 316L stainless steel Output connector Mating connector Recommended cabling 1/4-28 captive hex head screw, 0.046" diameter safety wire hole 2 pin, MIL-C-5015 style R6 type J10/J9T2A Accessories supplied: 1/4-28 captive hex head screw; calibration data (level 2) Certifications Class I, Div 1 Groups A, B, C, D Class II, Div 1 Groups E, F, G Class III Class I Zone 0 AEx/Ex ia IIC T4 Ta = -50°C to 120°C Relabeled model 787A-IS from Wilcoxon Sensing Technologies Must be installed per document 12879. For application in explosive atmospheres caused by gases, vapours or mists and where the use of apparatus of category 1G is required, electrostatic charges on the cable and non-metallic parts of the enclosure shall be avoided. The ambient temperature range for these applications is -40°C to +80°C. Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Istec | www.istec.com 99444 Rev.A 11/22