ISOPIPE

ISOPIPE

Product catalog summary
Characteristics
ISOPIPE is a flexible microporous material known for its low thermal conductivity, providing excellent insulation properties. It primarily consists of pyrogenic silica, opacifiers to minimize radiation, and reinforcing fibers.
Geometry
Standard dimensions are 1100x700mm, with available thicknesses of 10, 15, 20, and 25mm.
Core Composition
The core is composed of approximately 50-90% SiO2 (non-crystalline), 8-49% SiC, and 1-6% other materials.
Safety Instructions
The materials comply with the European directive UE2006/1907/EEC, indicating they are not hazardous to humans or the environment. The fibers used have a diameter greater than 3μm.
Lifespan
When stored properly in a dry environment, the panels have an indefinite lifespan.
Disclaimer
This data sheet is intended to assist in designing with Isoleika products and does not constitute any warranties. Users must determine the suitability of the products for their specific applications.
See more

Catalog excerpts

ISOPIPE-1

Data Sheet ISOPIPE Characteristics ISOPIPE is a bendable microporous material with a very low thermal conductivity, which means that it has very high insulation properties. It is based mainly in pyrogenic silica, opacifiers to reduce radiation and fibres as reinforcers. ^ Geometry Standard format • 1100x700mm ■j-' Safety instructions The materials used are not dangerous for humans or environment following the European directive UE2006/1907/EEC. The fibres used in the core have a diameter >3|im. ^ Lifespan If properly stored, the lifespan of the panel has no expiring date. It is recommended to store the panel in a dry environment. Product data The information contained in this data sheet/brochure is intended to assist in designing with Isoleika products. It is not intended to and does not create any warranties, express or implied, including but not limited to any warranty of merchantability or fitness for a particular purpose or that the results shown on this data sheet will be achieved by a user for a particular purpose. The user is responsible for determining the suitability of Isoleika products for each application. www.isoleika.com [email protected] Version 01 ISOPIPE

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.