*mydirectindustry

DPE INDUS

Product catalog summary

Overview: The document describes an injection molding machine designed for 2-component resins, suitable for large volume and sensitive applications where precision and control are essential. It is intended for casting, potting, and RIM applications.

Specifications:

Mixing Head: Disposable static mixer.
Interface: 10” touchscreen with supervision software and data acquisition.
Tanks: Pressurized tanks ranging from 9L to 200L, with optional heating, stirring, and degassing.
Pumps and Motors: Gear pumps and motors.
Flow Rate: 50 to 3,000 cc/min.
Mix Ratio: 100/10 to 100/100 (%).
Viscosity: 10 to 50,000 mPa.s.
Temperature: 0 to 120°C.
Power Supply: 230V/400V.
Resin Types: PU, Epoxy, Silicone.

Technical Data: The machine includes standard sensors for low level and pump pressure.

Software Features:

Customizable settings for security pressure limits, base/hardener ratio, pot life, and renewal purge.
Three access levels: Production, Administrator, Maintenance.
Automatic adjustment of base/hardener ratio.
Data saving and exporting capabilities.

Options:

Heating and stirring capabilities.
Flowmeter and degassing/vacuum options.
Fixed or mobile mixing head.
Tank feeding from 200L drum or 1,000L container.
Dynamic mixing head and pressure sensor at mixer outlet.
Dryer available.

Catalog excerpts

EQUIPEMENTS POUR APPLICATIONS DE COULEE, ENCAPSULATION, RIM, … EQUIPMENTS FOR CASTING, POTTING, RIM ,… DPE INDUS Machine d'injection pour résines 2 composants adaptée aux gros volumes et aux applications sensibles où la précision et le contrôle sont indispensables. Injection molding machine for 2-component resins suitable for large volume and sensitive applications where precision and control are essential. Tête de mélange Mélangeur Statique Jetable Mixing Head Disposable Static Mixer Ecran Tactile 10” Logiciel de Supervision + Acquisition 10” Touchscreen Supervision Software + Data Acquisition Cuves 9 L à 200 L pressurisées Options de chauffe, agitation, dégazage… Pressurized 9L to 200 L tanks Heating belt, stirring, degassing... in option Châssis adaptable aux besoins Adaptative frame to needs Pompes à Engrenages et moteurs Gear Pumps and Motors Machine à titre indicatif et informatif uniquement, ne présentant aucune valeur contractuelle. This machine is considered as indicative and informative only and do not present

Open the catalog to page 1

CARACTERISTIQUES / TECHNICAL DATA Débits / Flow rate Rapport de mélange / Mix ratio Viscosité / Viscosity Capacité des cuves / Tank capacity Capteurs en standard / Sensors in standard Type de résine / Resin type Température / Temperature Alimentation / Power supply Interface / Interface 50 → 3 000 (cc/min) 100/10 → 100/100 (%) 10 → 50 000 (mPa.s) 9 → 200 (L) Niveau bas / Pression pompe Low level / Pump pressure PU / EPOXY/ SILICONE 0 → 120 (°C) 230V /400V Tactile 10’’ / Touchscreen 10’’ AUTOMATISME / SOFTWARE  Réglages paramétrables : - Seuils de pression de sécurité - Ratio Base/Durcisseur...

Open the catalog to page 2

All Isojet Equipments catalogs and technical brochures

Machine dosage ECO
2 Pages
PRESSE
2 Pages
PISTON
2 Pages
DPE HV
2 Pages
CUVE / TANK
2 Pages