ACCREDITED CALIBRATION LABORATORY CONFORMING TO STANDARD UNI EN ISO/IEC 17025 LAT N° 01021 Signatory of EA, IAF and ILAC Mutual Recognition Agreements Calibration service for liquid flow meters Calibration Laboratory

The calibration laboratory consists of plants and devices for the calibration of measuring instruments for the following physical quantities: • Volume (totalized) • Volume flow • Mass (totalized) • Mass flow • Thermal energy The system consists of 8 calibration lines, each design for the hydraulic connection of a group of nominal diameters, using either the static weight, master meter or master volume calibration method as detailed in the following table. The system consists of a calibration system using the static weighing method complying with the norm UNI EN 24185:1994 "Measurement of fluid...

The flow rates ranges and test volumes per calibration line is as follows (nominal values): Thermal energy parameter is accredited over the range from 10 kJ to 21,000 MJ, with flow rates from 0.015 m3/h to 1,000 m3/h, water temperatures from 0 to 150 °C, and temperature differences (AT) from 3 K to 150 K. Issue of Calibration Certificates (CT) according to UNI EN ISO 17025. Issue of Calibration Certificates (CT) according to UNI EN ISO 17025 complete with declaration of conformity to specification with limits and decision rule defined with the customer. Subsequent verification of measuring instruments...

SOFTWARE Calibration processes activities are completely automated. The system management software controls all the calibration operations. Synoptic of line 8 for diameters up to DN3000 Synoptic of lines 1 to 6 for diameters Synoptic of line 7 for diameters The management and is directly ration The management of all calibration orders is fully automated and is directly linked with the software system issuing Certificates of Calibration at the end of the tests. Signatory of EA, IAF and ILAC Mutual Recognition Agreements THE MANUFACTURER RESERVES THE RIGHT TO CHANGE THE CONTENTS WITHOUT PRIOR NOTICE...