Users fist Oownlo-td list Upload list ISO"•Hem energy

The DMT (Data Managment Terminal) is a data center able to receive up to 120 M-Bus points of measure. Its can operate and monitor by M-Bus plants as complete systems with state-of-the-art technology and customer-friendly operation. The 7" TFT touch screen display ensures easy-to-handle on-site operation without the need of a PC. Because it contains a Web server, the instrument can also be remotely operated via either a direct telephone link (GPRS) or an Intranet/Internet network. It can be operated with every Web browser which reproduces the operating display of the instruments and allows protocol...

ISOFLUX r CALCULATOR FOR SYSTEM M20| UP TO 120 M-BUS POINTS OF MEASURE FLOW SENSOR FOR SYSTEM Can be used for the second circuit Any meter for any kind of measurement (e.g. gas, electricity etc..) if provided by Mbus protocol can be connected to the DMT.

ENERGY METERS HVAC&R - Building automation Thermal energy is determined by a calculation which derives from the application of the following physical relation: E=V*K*Δt Where: V = Volume of the thermal carrierfluid (to be measured) HEATING/COOLING METER: Direct measuring methodology requires the flow to be measured directly from the thermal carrier fluid and the energy is usually performed by using: • ow meter by pulses fl or analog • nergy calculator e • wo paired t temperature sensors K = Specific calorific coefficient of the thermal carrier fluid called Enthalpy (in relation to the internal...

IFK ENERGY METER The device is equipped with 8-digits LCD (Liquid Crystal Display) with special symbols to display parameters, measurement units and operation modes. The following information can be displayed: • integral and instantaneous measured parameters • archive data • device configuration information • report printing control information Display resolution (directly corresponding with pulse output value), depending on programmed maximum flow rate value. The IFK is designed for metering and monitoring of heating and cooling energy in closed heating/cooling systems, installed in dwelling...

Temperature sensor pair PLT/PLH Wire connection Sensor type PLT: 2 wire max 5 mt 4 wire max 10 mt - with head PLH: until 30 mt Pt500 (Pt 100 & Pt 1000 on request) Temperature difference, which is measured by temperature sensors pair and which is directly related to the quantity of thermal energy, calculated by the calculator, where are connected. PLT: brass until DN150, max stem length: 225 mm PN16 PLH: SSteel >l DN150, max stem length: 225 mm PN40 - ISONRG® - THE manufacturer reserves the right to make design improvements without notice. COMPANY WITH QUALITY SYSTEM CERTIFIED BY DNV GL = ISO...