- Catalogs
- ISOIL Industria Spa
- ISOMAG MV210 converter for electromagnetic flow meters
ISOMAG MV210 converter for electromagnetic flow meters
ISOMAG MV210 converter for electromagnetic flow meters
The MV210 is compatible with ISOMAG® sensors, requiring a minimum conductivity of 5 µS/cm. It operates at altitudes from -200 m to 4000 m and ambient temperatures of -20 to +60°C for aluminum housing and -10 to +50°C for reinforced nylon. It supports 0 to 100% humidity and has an IP67 protection rate. The power supply ranges from 100-240 V~ with a consumption of 20VA at 44-66 Hz. Features include a USB port for programming, bi-directional flow, diagnostic functions, and empty pipe detection.
Detailed dimensions are provided for both compact and separate (wall) versions, including junction boxes and housing measurements.
The MV210 includes digital and analog outputs, digital inputs, and detailed electrical connection diagrams. It supports RS 485 and Wi-Fi for programming, with optional HART protocol on analog output 1.
The functions menu includes settings for pulse and flow rate measurement units, totalizer settings, sensor calibration, and alarm configurations. Display settings, data logging, and communication protocols are also covered.
The MV210 has a flow rate tolerance of ±0.05% and output tolerances of ±0.08%. A table provides accuracy details based on different sensor models and conditions.
Ordering codes are provided for different configurations, including display options, housing materials, and protection rates. Requirements for programming and available connectors are specified.
The product features painted aluminum die casting with an IP68 protection rate, suitable for immersion up to 1.5 meters underwater. It includes IP68 MIL connectors for sensor cables and power supply. Available in compact and separate versions, with wall mounting and display visibility options.
Various power supply options range from 12 to 240 VAC/VDC, with some versions including a rechargeable backup battery supporting measurements for up to 15 days.
Analogue output options include none, one, or two outputs with optional Hart protocol. Digital configurations include digital input only or programmable digital outputs and inputs.
Options include no gateway, RS485 port with MODBUS protocol, Hart, Wi-Fi for programming, and others. Protocol options include no protocol or Modbus over RS485.
Data logging options include MicroSD Memory with Data Logger, RTC, BIV, and Meter Data. Special features include anticondense cap and cable gland configurations.
No MID approval is specified. The manufacturer reserves the right to change product specifications without notice. For a complete list of distributors or service inquiries, visit the provided link or contact the provided email address.
Catalog excerpts
TECHNICAL DATA_____________________________________________________________________1 OVERALL DIMENSION_________________________________________________________________2 HORIZONTAL VERSION________________________________________________________________4 VERTICAL VERSION___________________________________________________________________4 MV210 EXPLODED LAYOUT_____________________________________________________________5 MAIN PAGES VISUALIZATION___________________________________________________________6 ELECTRICAL CONNECTIONS____________________________________________________________7 DIGITAL...
Open the catalog to page 3
The manufacturer guarantees only English text available on our web site www.isoil.com ■ TECHNICAL DATA STANDARD FEATURES OVERALL FEATURES
Open the catalog to page 4
Compact version ■ OVERALL DIMENSION isomag ^ The manufacturer guarantees only English text available on our web site www.isoil.com
Open the catalog to page 5
The manufacturer guarantees only English text available on our web site www.isoil.com Separate (wall) version
Open the catalog to page 6
Horizontal version The manufacturer guarantees only English text available on our web site www.isoil.com
Open the catalog to page 7
MV210 EXPLODED LAYOUT TERMINAL BLOCK COVER POS.
Open the catalog to page 8
■ MAIN PAGES VISUALIZATION isomag ^ The manufacturer guarantees only English text available on our web site www.isoil.com
Open the catalog to page 9
ELECTRICAL CONNECTIONS The manufacturer guarantees only English text available on our web site www.isoil.com * If the option HART is enable
Open the catalog to page 10
DIGITAL INPUT on/off input (external power supply) on/off input (internal power supply) 16 (-) 16 (-) The manufacturer guarantees only English text available on our web site www.isoil.com DIGITAL OUTPUTS ANALOG OUTPUTS
Open the catalog to page 11
FUNCTIONS MENU Nominal diameter measure unit Cable length on separate version Flowrate type measure unit: metric or not metric Pulse 1 type measure unit: metric or not metric Pulse 2 type measure unit: metric or not metric Total direct totalizer measure unit type: metric or not metric Total direct totalizer measure unit Total direct totalizer decimal point position Partial direct totalizer measure unit type: metric or not metric Partial direct totalizer measure unit Partial direct totalizer decimal point position Total reverse totalizer measure unit type: metric or not metric Total reverse totalizer...
Open the catalog to page 12
Measure filter Low flow zero threshold: 0-25% of full scale value Automatic calibration verify Automatic change of measurement range High immunity inputs Maximum value alarm set for direct flow rate Maximum value alarm set for reverse flow rate Minimum value alarm set for direct flow rate Minimum value alarm set for reverse flow rate Hysteresis threshold set for the minimum and maximum flow rate alarms Current output value in case of failure Frequency output value in case of alarms The manufacturer guarantees only English text available on our web site www.isoil.com Total direct (positive) flow...
Open the catalog to page 13
HART Packet byte preambles hart HART Bus output - control ■»«■«■» Device communication address number MODBUS link speed MODBUS link parity MODBUS reply delay Maximum delay between chars (frames) MODBUS The manufacturer guarantees only English text available on our web site www.isoil.com Choice of the language: E= English, I=italian Display contrast Display/keyboard inactivity time Display updating frequency: 1-2-5-10 Hz Display function number Display function selection lock Partial totalizer enable Negative totalizer enable Net totalizer enable Time and date display enable Quick start menu visualization...
Open the catalog to page 14
The manufacturer guarantees only English text available on our web site www.isoil.com 12.1 Self test diagnostic function 12.2 Function tests physical display 12.3 Sensor verify diagnostic function 12.4 Flow rate simulation enabling 12.5 Display internal measured value 12.6 Display comm, diagnostic values 12.7 Display measure as graphs 12.8 Generic sensor parameters set 12.9 Sd card status informations 12.11 Board serial number 12.12 Total working time 13.1 Daylight saving time change 13.2 Localized time zone 13.3 System date and time 13.4 Access level 1 code 13.5 Access level 2 code 13.6 Access...
Open the catalog to page 15
Typical error profile (pure indication only) The manufacturer guarantees only English text available on our web site www.isoil.com ⇒ e = +/- A % (reading value) speed < 0,5 m/s (1,64 ft/s) ⇒ e = +/- (B/V) % (reading value) speed ≥ 0,5 m/s (1,64 ft/s) minimum flow (l/s): DN x DN x 0,008/1000( DN expressed in mm ) where: e = ACCURACY V = WORKING SPEED (A and B values: see below table according to CONVERTER model) Insertion sensors See sensors DATA SHEET Reference conditions below and as per internal testing procedures: Constant flow rate during the test Pressure: >30 Kpa Flow condition : fully...
Open the catalog to page 16
isomag ^ The manufacturer guarantees only English text available on our web site www.isoil.com CODE EXAMPLE
Open the catalog to page 17
The manufacturer guarantees only English text available on our web site www.isoil.com MV210-A0A1A0A0A0A0 (Complete code example for order)MV210_IT_EN_DS063REV00_IS
Open the catalog to page 18
Due to the constant technical development and improvement of its products, the manufacturer reserves the right to make changes and/or modify the information contained in this document without notice.
Open the catalog to page 19All ISOIL Industria Spa catalogs and technical brochures
MS60010 Pages
Data Logger MV1554 Pages
ISOMAG Magnetic flowmeters8 Pages
ISOFLUX IFX serie 0451 Pages
ISOMAG MS100012 Pages
ISOMAG MS241010 Pages
ISOFLUX IFX serie 0322 Pages
ISOMAG MS 50114 Pages
ISOMAG MS 100012 Pages
ISOMAG MS 50009 Pages
ISOMAG MS 390011 Pages
ISOFLUX IFX-P2106 Pages
ISONRG DMT6 Pages
ISONRG ML3114 Pages
ISOFLUX Heat meter IFX-E34 Pages
ISONRG_Brochure4 Pages
The ISOFLUX Line4 Pages
- Valve
- ISOIL flow meter
- Water valve
- Ball valve
- Temperature probe
- ISOIL volume flow meter
- ISOIL liquid flow meter
- Regulating valve
- Automation software solution
- Management software solution
- Data logger
- Resistance temperature sensor
- Electric valve
- Analysis software solution
- Process software
- Real-time software
- Control software
- ISOIL waterproof flow meter
- Temperature datalogger
- ISOIL stainless steel flow meter