DATA SHEET

INDEX TECHNICAL DATA 2 NOTES FOR PED DIRECTIVE FOR SENSOR 3 RECOMMENDED INSTALLATION PROCEDURE 8 PRESSURE LOSS CALCULATION (CONES 8° ANGLES) 10

The manufacturer guarantees only English text available on our web site www.isoil.com TECHNICAL DATA STANDARD FEA TURES OPTIONAL FEATURES (CHECK FOR MORE DETAILS 'HOW TO ORDER'ON LAST PAGE) OVERALL FEATURES

The manufacturer guarantees only English text available on our web site www.isoil.com ISOMAG*NOTES FOR PED DIRECTIVE FOR SENSORHere below the tables of products subject to Directive Pressure Equipment Device 2014/68/UE (PED) implemented by legislative decree February 15, 2016, n. 26The tables show which category of PED is applicable according to the water operating temperature (TAB AT <110 ° C TAB BT> = 110°C), sensor’s DIM and its nominal pressure. DN / PN CORRELATION TABLE AND PED DIRECTIVE ONLY FOR FAMILY MS2500-MS1000 AND PN MAX 40 Bar ONLY FOR METER WITH LINING IN PTFE FOR METER FAMILY MS2500...

The manufacturer guarantees only English text available on our web site www.isoil.com

SENSOR VERSIONS/JUNTION BOX The manufacturer guarantees only English text available on our web site www.isoil.com PRICE LIST OPTIONS

The manufacturer guarantees only English text available on our web site www.isoil.com SEPARATE VERSION Notes: □ It is recommended to install the connection cables away from, or protect against sources of electromagnetic noise. □ The minimum conductivity of the liquid medium to ensure correct functionality of the empty pipe detection is 20 pS/cm

The manufacturer guarantees only English text available on our web site www.isoil.com Avoid a partially empty pipe, during operation the pipe must be either completely full or liquid or completely

The manufacturer guarantees only English text available on our web site www.isoil.com ISOMAG ^RECOMMENDED INSTALLATION PROCEDURE Sensors weighing more than 20Kg are equipped of appropriate eyebolts to lift the sensor according to the drawing above. The eyebolts support ONLY the weight of the meter.

The manufacturer guarantees only English text available on our web site www.isoil.com ISOMAG *SENSOR GROUNDING 9 di 13

The manufacturer guarantees only English text available on our web site www.isoil.com Fluid density [kg/m3] typical value r = 1000 [kg/m3] sensor diameter [m] pipe diameter (greater than sensor diameter) [m] Mean flow velocity in sensor diameter [m/s] □ p = 1000 [kg/m3] as goodness approximation of water density in common use. □ Inner diameter of sensor is used for d, express in meters. □ Indeed pressure loss equation is dimensionally correct in [Pa]. The equation results in table are show in [mbar].

HOWTO ORDER The manufacturer guarantees only English text available on our web site www.isoil.com

The manufacturer guarantees only English text available on our web site www.isoil.com Version / Protection rate Complete code example for order

If you want to find the complete list of our distributors access at the following link: Due to the constant technical development and improvement of its products, the manufacturer reserves the right to make changes and/or modify the information contained in this document without notice.