GM - Miniature Solenoid

Product catalog summary

Overview
The document provides technical specifications for GM miniature solenoids manufactured by ISLIKER MAGNETE AG. It includes details on different models such as GM-20.05, GM-26.08, and GM-35.10, highlighting their dimensions, stroke, force, and power requirements.

Specifications
Each solenoid model is described with its dimensions in millimeters, stroke length, minimum force (Fmin), and electrical power requirements. The solenoids are designed to operate at a preferred voltage of 24VDC, with a maximum of 50VDC, and are compliant with DIN VDE 0580 standards.

Duty Cycle and Performance
The duty cycle is specified with a maximum time of 30 seconds for calculation. The document provides data on work done in Ncm, electrical power in watts, and operating and release times in milliseconds at an operating temperature of 20°C.

Construction and Features
The solenoids are available with or without a push rod and return spring. They feature zinc-plated and chrome-passivated housings, with hard chrome-plated plungers. The solenoids are RoHS compliant and free of halogens.

Ordering Information
Ordering specifications include details on size, stroke, duty cycle, voltage, and electrical termination options. Special designs and configurations are available upon request.

Notes
All solenoids are tested according to DIN VDE 0580, and force values are measured at 20°C with 90% of the rated voltage. The document notes that specifications are subject to change without notice and provides general installation and safety instructions.

Catalog excerpts

ISLIKER MAGNETE AG www.islikermagnete.ch 1/2 ISLIKER MAGNETE AG | CH-8450 Andelfingen | +41 52 305 25 25 | [email protected]

Open the catalog to page 1

GM Miniaturmagnet GM Miniature solenoid ISLIKER MAGNETE AG | CH-8450 Andelfingen | +41 52 305 25 25 | [email protected] CHE-108.813.409 MWST

Open the catalog to page 2

Magnet bestromt gezeichnet Solenoid illustrated in energised positionMax. Einschraubtiefe der Befestigungsschrauben ist 2 mmMax. depth of thread for fixing screw = 2 mm Mit Federruckstellung with return spring Die Spieldauer fur die Berechnung der Einschaltdauer be-tragt 30 sec. = Nicht Standard / not standard ISLIKER MAGNETE AG | CH-8450 Andetfingen | +41 52 305 25 25 | [email protected]

Open the catalog to page 3

GM-20.05 Miniaturmagnet GM-20.05 Miniature solenoidSpezifikationen Specifications Funktion ohne Index keine Stossstange Baugrosse Nennhub des Magneten in mm Einschaltdauer (ED) in % U: Universalanschluss W: Litzenanschluss Spannung in Volt II Anschlusse auf Zugseite Mit Ruckstellfeder Ohne Ruckstellfeder kein Index Index der Federkennlinie "D": mit Dampfung (nur mit Feder moglich) ohne Index keine Dampfung Ordering specification Type GM: D.C. Miniature solenoid s: with push rod without push rod - no index Rated stroke of solenoid in mm Duty cycle in % I Electrical termination on push side II...

Open the catalog to page 4

GM-26.08 Miniaturmagnet GM-26.08 Miniature solenoid Magnet bestromt gezeichnet Solenoid illustrated in energised position Max. depth of thread for fixing screw = 3 mm Mit Federruckstellung with return spring Die Spietdauer fur die Berechnung der Einschaltdauer be-tragt 30 sec. = Nicht Standard / not standard 1/2 ISLIKER MAGNETE AG | CH-8450 Andetfingen | +41 52 305 25 25 | [email protected] CHE-108.813.409 MWST

Open the catalog to page 5

GM-26.08 Miniaturmagnet GM-26.08 Miniature solenoidSpezifikationen Specifications Funktion ohne Index keine Stossstange Baugrosse Nennhub des Magneten in mm Einschaltdauer (ED) in % U: Universalanschluss W: Litzenanschluss Spannung in Volt II Anschlusse auf Zugseite Mit Ruckstellfeder Ohne Ruckstellfeder kein Index Index der Federkennlinie "D": mit Dampfung (nur mit Feder moglich) ohne Index keine Dampfung Ordering specification Type GM: D.C. Miniature solenoid s: with push rod without push rod - no index Rated stroke of solenoid in mm Duty cycle in % I Electrical termination on push side II...

Open the catalog to page 6

Magnet bestromt gezeichnet Solenoid illustrated in energised positionMax. Einschraubtiefe der Befestigungsschrauben ist 4 mmMax. depth of thread for fixing screw = 4 mm Mit Federruckstellung with return spring Die Spietdauer fur die Berechnung der Einschaltdauer be-tragt 30 sec. = Nicht Standard / not standard ISLIKER MAGNETE AG | CH-8450 Andetfingen | +41 52 305 25 25 | [email protected]

Open the catalog to page 7

Ordering specification ohne Index keine Stossstange Baugrosse Nennhub des Magneten in mm Einschaltdauer (ED) in % U: Universalanschluss W: Litzenanschluss Spannung in Volt II Anschlusse auf Zugseite Mit Ruckstellfeder Ohne Ruckstellfeder kein Index Index der Federkennlinie "D": mit Dampfung (nur mit Feder moglich) ohne Index keine Dampfung Type GM: D.C. Miniature solenoid s: with push rod without push rod - no index Rated stroke of solenoid in mm Duty cycle in % I Electrical termination on push side II Electrical termination on pull side With return-spring assembly Without spring - no index Index...

Open the catalog to page 8

GM - Miniature Solenoid

GM - Miniature Solenoid

Catalog excerpts

All ISLIKER MAGNETE AG catalogs and technical brochures