- Catalogs
- ISLIKER MAGNETE AG
- GK - Small Solenoid (push/pull)
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
GK - Small Solenoid (push/pull)
GK - Small Solenoid (push/pull)
The document outlines the technical specifications for small solenoids (pull/push) produced by ISLIKER MAGNETE AG. It covers dimensions, stroke, force, duty cycle, and operational parameters for various models.
The solenoids adhere to DIN VDE 0580 standards, tested at 20°C with 90% of the rated voltage. Force values may vary by ±10%. They are RoHS compliant and halogen-free. Specifications can change without notice, and special designs are available.
Models include GK-20.03, GK-20.05, GK-26.04, and GK-26.07, with dimensions from Ø20 x 33 mm to Ø26 x 41 mm. Stroke lengths range from 3 mm to 7 mm, and minimum force (Fmin) from 1.2 N to 3.7 N. Duty cycles range from 5% to 100% over 30 seconds.
Work done is measured in Ncm, and power consumption in watts. Operating and release times are specified at +20°C with a load of 70% of the solenoid force.
Ordering includes solenoid type, operation, diameter, stroke, duty cycle, lead wire type, voltage, and return spring. Example: GKz - 20.03 - 100 W - 24 F0.8.
Preferred voltage is 24VDC (max. 50VDC), classified under insulation class B (130°C). Protection degree is IP20, with 300mm lead wires (AWG24). Housing is nitrocarburized.
Details for models GK-26.07, GK-32.06, and GK-32.09 are provided, designed for pull and push operations, compliant with DIN VDE 0580.
Maximum duty cycle is 30 seconds, with cycles of 5%, 15%, 25%, 40%, and 100%. Work done ranges from 3.5 to 20 Ncm, with power consumption up to 120W.
Times are given for each model at +20°C with a 70% load, varying slightly between models.
Graphs show force (Fn) versus stroke (mm) for different models, illustrating mechanical performance.
Includes solenoid type, diameter, stroke, duty cycle, lead wire, voltage, and return spring. Example codes are provided.
Solenoids are RoHS compliant and halogen-free. Force values may vary by ±10%. Special designs are available, and specifications can change without notice.
References "Technical Explanations" for further use, installation, and safety instructions.
Catalog excerpts
ISLIKER MAGNETE AG www.islikermagnete.ch GK - Kleinmagnet (ziehend / stossend) Datenblätter GK - Small solenoid (pull / push) 1/2 ISLIKER MAGNETE AG | CH-8450 Andelfingen | +41 52 305 25 25 | [email protected]
Open the catalog to page 1
GK Kleinmagnet (ziehend / stossend) GK Small solenoid (pull / push) ISLIKER MAGNETE AG | CH-8450 Andelfingen | +41 52 305 25 25 | [email protected] CHE-108.813.409 MWST
Open the catalog to page 2
GK-20.03 Kleinmagnet (ziehend / stossend) Magnet bestromt gezeichnet Solenoid illustrated in energised position mit Federruckstellung with return spring mit Federruckstellung with return spring Magnet bestromt gezeichnet Solenoid illustrated in energised position Die Spieldauer fur die Berechnung der Einschaltdauer be-tragt 30 sec. = Nicht Standard / not standard ISLIKER MAGNETE AG | CH-8450 Andelfingen | +41 52 305 25 25 I [email protected]
Open the catalog to page 3
GK-20.03 Kleinmagnet (ziehend / stossend) Spezifikationen Specifications Ordering specification Durchmesser des Magneten [mm] Nennhub des Magneten [mm] Einschaltdauer (ED) [%] Ohne Ruckstellfeder kein Index Type GK: D.C. small solenoid z: pull Diameter of solenoid [mm] Rated stroke of solenoid [mm] Duty cycle [%] W: Lead wire Rated voltage [V] With return-spring assembly Without spring - no index Index of return-spring 1) Magnete hergestellt und gepruft nach DIN VDE 0580 2) Magnetkraft betriebswarm gemessen bei 20°C Umgebungstemperatur, waagrechter Bewegungsrichtung mit 90% Nennspannung 3) Die...
Open the catalog to page 4
GK-20.05 Kleinmagnet (ziehend / stossend) GK-20.05 Small solenoid (pull / push) Magnet bestromt gezeichnet Solenoid illustrated in energised position mit Federruckstellung with return spring 3E Magnet bestromt gezeichnet Solenoid illustrated in energised position mit Federruckstellung with return spring Die Spieldauer fur die Berechnung der Einschaltdauer be-tragt 30 sec. = Nicht Standard / not standard ISLIKER MAGNETE AG | CH-8450 Andelfingen | +41 52 305 25 25 I [email protected]
Open the catalog to page 5
GK-20.05 Kleinmagnet (ziehend / stossend) Type GK: D.C. small solenoid z: pull Diameter of solenoid [mm] Rated stroke of solenoid [mm] Duty cycle [%] W: Lead wire Rated voltage [V] With return-spring assembly Without spring - no index Index of return-spring Durchmesser des Magneten [mm] Nennhub des Magneten [mm] Einschaltdauer (ED) [%] Ohne Ruckstellfeder kein Index Bemerkungen 1) Magnete hergestellt und gepruft nach DIN VDE 0580 2) Magnetkraft betriebswarm gemessen bei 20°C Umgebungstemperatur, waagrechter Bewegungsrichtung mit 90% Nennspannung 3) Die Magnethaftkraftwerte gelten nur als Referenzwerte...
Open the catalog to page 6
GK-26.04 Kleinmagnet (ziehend / stossend) Magnet bestromt gezeichnet Solenoid illustrated in energised position 29_^_ mit Federruckstellung with return spring stossend (s) / push (s) 114 Magnet bestromt gezeichnet Solenoid illustrated in energised position mit Federruckstellung with return spring 47.2 _, . (20) Die Spieldauer fur die Berechnung der Einschaltdauer be-tragt 30 sec. = Nicht Standard / not standard 1/2 ISLIKER MAGNETE AG | CH-8450 Andelfingen | +41 52 305 25 25 I [email protected]
Open the catalog to page 7
GK-26.04 Kleinmagnet (ziehend / stossend) Spezifikationen Specifications Ordering specification Durchmesser des Magneten [mm] Nennhub des Magneten [mm] Einschaltdauer (ED) [%] Ohne Ruckstellfeder kein Index Type GK: D.C. small solenoid z: pull Diameter of solenoid [mm] Rated stroke of solenoid [mm] Duty cycle [%] W: Lead wire Rated voltage [V] With return-spring assembly Without spring - no index Index of return-spring 1) Magnete hergestellt und gepruft nach DIN VDE 0580 2) Magnetkraft betriebswarm gemessen bei 20°C Umgebungstemperatur, waagrechter Bewegungsrichtung mit 90% Nennspannung 3) Die...
Open the catalog to page 8
GK-26.07 Kleinmagnet (ziehend / stossend) Hr hi Magnet bestromt gezeichnet Solenoid illustrated in energised position mit Federruckstellung with return spring mit Federruckstellung with return spring Die Spieldauer fur die Berechnung der Einschaltdauer be-tragt 30 sec. = Nicht Standard / not standard ISLIKER MAGNETE AG | CH-8450 Andelfingen | +41 52 305 25 25 I [email protected]
Open the catalog to page 9
GK-26.07 Kleinmagnet (ziehend / stossend) Spezifikationen Specifications Ordering specification Durchmesser des Magneten [mm] Nennhub des Magneten [mm] Einschaltdauer (ED) [%] Ohne Ruckstellfeder kein Index Type GK: D.C. small solenoid z: pull Diameter of solenoid [mm] Rated stroke of solenoid [mm] Duty cycle [%] W: Lead wire Rated voltage [V] With return-spring assembly Without spring - no index Index of return-spring 1) Magnete hergestellt und gepruft nach DIN VDE 0580 2) Magnetkraft betriebswarm gemessen bei 20°C Umgebungstemperatur, waagrechter Bewegungsrichtung mit 90% Nennspannung 3) Die...
Open the catalog to page 10
GK-32.06 Kleinmagnet (ziehend / stossend) ziehend (z) / pull (z) Hub / stroke = 6mm Magnet bestromt gezeichnet Solenoid illustrated in energised position mit Federruckstellung with return spring mit Federruckstellung with return spring Magnet bestromt gezeichnet Solenoid illustrated in energised position Die Spieldauer fur die Berechnung der Einschaltdauer be-tragt 30 sec. = Nicht Standard / not standard ISLIKER MAGNETE AG | CH-8450 Andelfingen | +41 52 305 25 25 I [email protected]
Open the catalog to page 11
GK-32.06 Kleinmagnet (ziehend / stossend) Spezifikationen Specifications Ordering specification Durchmesser des Magneten [mm] Nennhub des Magneten [mm] Einschaltdauer (ED) [%] Ohne Ruckstellfeder kein Index Type GK: D.C. small solenoid z: pull Diameter of solenoid [mm] Rated stroke of solenoid [mm] Duty cycle [%] W: Lead wire Rated voltage [V] With return-spring assembly Without spring - no index Index of return-spring 1) Magnete hergestellt und gepruft nach DIN VDE 0580 2) Magnetkraft betriebswarm gemessen bei 20°C Umgebungstemperatur, waagrechter Bewegungsrichtung mit 90% Nennspannung 3) Die...
Open the catalog to page 12
GK-32.09 Kleinmagnet (ziehend / stossend) Magnet bestromt gezeichnet Solenoid illustrated in energised position mit Federruckstellung with return spring mit Federruckstellung with return spring Magnet bestromt gezeichnet Solenoid illustrated in energised position Die Spieldauer fur die Berechnung der Einschaltdauer be-tragt 30 sec. = Nicht Standard / not standard 1/2 ISLIKER MAGNETE AG | CH-8450 Andelfingen | +41 52 305 25 25 I [email protected]
Open the catalog to page 13All ISLIKER MAGNETE AG catalogs and technical brochures
DYNAMAG DYM-050 data sheet4 Pages
UG - Industrial Solenoids8 Pages
GE - Economy Solenoid26 Pages
GM - Miniature Solenoid8 Pages
GMH - Selfholding Solenoid2 Pages
GT - Electro Magnets18 Pages
DGV - Rotary Solenoids8 Pages
Product Selection Checklist2 Pages
Product Overview8 Pages
Technical Explanations14 Pages
- Linear solenoid
- DC solenoid
- Compact solenoid
- Holding solenoid
- Pull solenoid
- Push-pull solenoid
- Push solenoid
- Industrial solenoid
- Permanent magnet solenoid
- Solenoid with spring return
- Custom-made solenoid
- Rotary solenoid
- Short-travel solenoid
- IP65 solenoid
- Open-frame solenoid
- Bistable solenoid
- IP20 solenoid
- Double-coil solenoid
- AC/DC solenoid