GCH - Bistable Selfholding Solenoid

1 / 2 PagesView full catalog

GCH - Bistable Selfholding Solenoid

Product catalog summary

Specifications

Rated Voltage: 24VDC
Permanent Holding Force (Currentless): ≥25N
Operating Mode: Coils individually controlled
Power Requirement: 72W
Duty Cycle: 5% (Cycle time 30s)
Pull-Force: 6N
Operating Time: 50ms

Power Mode

Operating Mode: Coils parallel; reverse polarity required
Power Requirement: 144W
Duty Cycle: 3% (Cycle time 30s)
Pull-Force: 12N
Operating Time: 45ms

Physical Characteristics

Stroke: 6mm
Connecting Wires: Four
Moving Mass: 0.009kg
Total Weight: 0.082kg

Standards and Compliance

Manufactured and tested according to DIN VDE 0580
Compliant with RoHS; free of halogens (PVC)
Force values measured at 20°C ambient temperature with 90% of rated voltage
Force values are reference only and can vary by ±10%
Special designs available
Specifications subject to change without notice

Ordering Specification

Type: GCH - Selfholding solenoid
Size: 25.06
Rated Stroke: 6mm
Duty Cycle: 3%
Lead Wire: W
Voltage: 24V

Additional Information

Class of Insulation: B (130°C) DIN VDE 0580
Test Voltage and Surge Category: EN 60664-1 III
Degree of Protection: IP20 (IEC 60529)
Electrical Termination: Lead wires (300mm), AWG24
Surface Treatment: Solenoid housing zinc plated & trivalent chrome passivated

Catalog excerpts

GCH-25.06 Bistabiler Selbsthaltemagnet GCH-25.06 Bistable selfholding solenoid >—stossen / push ziehen / pull —— vier Anschlusslitzen four connecting wires Spezifikationen Specifications Nennspannung ISLIKER MAGNETE AG | CH-8450 Andelfingen | +41 52 305 25 25 I [email protected] CHE-108.813.409 MWST

Open the catalog to page 1

GCH-25.06 Bistabiler Selbsthaltemagnet GCH-25.06 Bistable selfholding solenoid Isolierstoffklasse Nennhub des Magneten in mm Einschaltdauer (ED) [%] Ordering specification Type GCH: Selfholding solenoid Size Rated stroke of solenoid in mm Duty cycle [%] W: Lead wire Voltage [V] 1) Magnete hergestellt und gepruft nach DIN VDE 0580 2) Magnetkraft betriebswarm gemessen bei 20°C Umgebungstemperatur, waagrechter Bewegungsrichtung mit 90% Nennspannung 3) Die Kraftwerte gelten nur als Referenzwerte und konnen infolge Toleranzen um ±10% abweichen 4) Sonderausfuhrungen sind lieferbar 5) Anderungen vorbehalten...

Open the catalog to page 2

GCH - Bistable Selfholding Solenoid

GCH - Bistable Selfholding Solenoid

Catalog excerpts

All ISLIKER MAGNETE AG catalogs and technical brochures