Specifications:
The DYM-050 data sheet outlines the specifications for a device with a rated voltage of 24 VDC and a voltage range of 20.4 to 27.6 VDC. The device offers various stroke lengths (25, 20, 15, 10 mm) and selectable nominal forces depending on the configuration of Pin 8. The maximum power consumption is 75 W or 24 W, and the maximum current consumption is 3.125 A or 1.0 A, depending on the Pin 8 setting. The device is maintenance-free and has a lifetime of 40 million working cycles without load.

Procedures and Standards:
The device complies with DIN VDE 0580, EN 60664-1, and is RoHS II + III compliant. It has an insulation class B (130°C) and a degree of protection IP65. The electrical termination is via an M12 metric connector, A-coded, with 8 poles.

Recommendations and Notes:
The document notes that all DYNAMAG devices are manufactured and tested according to DIN VDE 0580. Forces are measured at 20°C ambient temperature with 90% of the rated voltage. Special designs are available, and specifications are subject to change without notice. The device is made in Switzerland and is free of halogens and silicone.

Accessories:
Accessories such as flange, swivel bearing, and clevis are available and can be ordered separately. Details are provided in a separate datasheet.

Dimensions and Weight:
The device's dimensions vary with stroke length, and the total weight ranges from 1.150 to 1.185 kg. The moving mass is approximately 0.145 to 0.155 kg.

Environmental Conditions:
The storage temperature range is -20 to +60°C, and the ambient temperature range is 0 to +40°C. The device can operate in relative humidity from 0 to 90%.