Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. ISL PRODUCTS INTERNATIONAL
  3. PGM-30
video corpo

PGM-30

PGM-30
1 / 13 PagesView full catalog

PGM-30

Product catalog summary

Overview

The document provides detailed technical specifications and performance data for a range of 30mm planetary gear motors manufactured by ISL Products International Ltd. These motors are carbon-brushed types designed primarily for intermittent duty operation, offering tailored torque and speed solutions with various gear reduction ratios and voltages.

Motor Types and Features

  • Motor Type: Carbon - Brushed
  • Gearhead Type: Planetary (some with ball bearing)
  • Duty Cycle: Best suited for intermittent duty operation
  • Encoder Option: Some models include a magnetic incremental encoder (2 channels, 7 pulses per revolution, 14 poles) for precise positioning feedback

Key Specifications

The motors vary by rated voltage (6V, 12V, 24V), reduction ratio, torque, speed, and power. Below are summarized critical parameters:

ModelRated VoltageReduction RatioRated Torque (kg.cm)Stall Torque (kg.cm)Rated Speed (rpm)No-Load Speed (rpm)Max Power (W)No-Load Current (A)
MOT-I-81573-30-276V DC27:1319338408 (+/-10%)20<1
MOT-IG30GM-1:1412V DC14:11.105.5432529 (+/-10%)7<0.2
MOT-IG30GM-1:1912V DC19:11.511.17310372 (+/-10%)10.66<0.2
MOT-I-81668-19E (with encoder)12V DC19:12.25--649790 (+/-10%)26<1
MOT-IG-30GM 1:10012V DC100:17506374 (+/-10%)9.4<0.25
MOT-IG-30GM 1:18912V DC189:111783339 (+/-10%)7.85<0.25
MOT-I-81442-26412V DC264:120119*4757 (+/-10%)17.3<1
MOT-IG30GM-19-24V24V DC19:11.7512.21332389 (+/-10%)12<0.08
MOT-I-4600824V DC35:15.322.25*161211 (+/-10%)12<0.31
MOT-IG30GM-1:7124V DC71:19.53876101 (+/-10%)10<0.325
MOT-IG30GM-24V (100:1)24V DC100:113545472 (+/-10%)10--

Note: Gearbox torque limitations are specified (typically 18 to 40 kg.cm depending on model). Operating beyond these limits may cause premature failure.

Performance and Efficiency

  • Rated torque ranges from 1.1 to 20 kg.cm depending on model and reduction ratio.
  • Stall torque varies widely, with some models rated up to 119 kg.cm (with caution on gearbox limits).
  • Rated speeds range from as low as 33 rpm (high reduction) to over 600 rpm (low reduction).
  • Maximum power output ranges from approximately 7 W to 26 W.
  • Efficiency data available for some models (e.g., 49% and 57%).

Electrical Characteristics

  • No-load current typically below 1 A, often much lower (down to 80 mA).
  • Stall current can be as high as 20 A for some low voltage, low reduction models.
  • Rated voltage options include 6V, 12V, and 24V DC.

Encoder Specifications (for models equipped)

  • Type: Magnetic incremental encoder
  • Channels: 2
  • Pulses per revolution: 7 PPR
  • Poles: 14
  • Connector: JST PHR-6
  • Operating temperature range: -10°C to 60°C
  • Supply voltage: 3.5V to 20V DC
  • Max humidity: 85% RH

Mechanical and Dimensional Data

All motors have a diameter of 30mm with inline planetary gearheads. Termination styles vary but commonly include terminals or JST connectors. Dimensions are provided in millimeters (mm) for integration purposes.

Recommendations and Limitations

  • Motors are optimized for intermittent duty cycles; continuous operation may reduce lifespan.
  • Gearbox torque limits must be respected to avoid premature failure (limits vary by model, typically 18-40 kg.cm).
  • Contact ISL Products International Ltd. for alternative solutions or custom configurations.

Contact Information

ISL Products International Ltd.
572 Walt Whitman Rd., Suite 100, Melville, NY 11747
Phone: 516-937-3475
Website: www.islproducts.com
Email: [email protected]

See more

Catalog excerpts

PGM-30-1

030mm Planetary Gear Motor Carbon - Brushed MOT-l-81573-30-27 Online ID#: PGM-30-6-27-408-C Our Planetary Gear Motors are an inline solution providing excellent torque output at various speeds. They are best for intermittent duty operation. With endless performance combinations, we have a fully tailored gear motor solution for you. Contact Us for alternative solutions! ISL Products International Ltd. • 572 Walt Whitman Rd., Suite 100 • Melville, NY 11747 • T 516-937-3475 • www.islproducts.com

 Open the catalog to page 1
PGM-30-2

030mm Planetary Gear Motor Carbon - Brushed MOT-IG30GM-1:14 Online ID#: PGM-30-12-14-529-03 Our Planetary Gear Motors are an inline solution providing excellent torque output at various speeds. They are equiped to handle varying loads and are best for intermittent duty operation. With endless performance combinations, we have a fully tailored gear motor solution for you. Contact Us for alternative solutions! [email protected] • www.islproducts.com

 Open the catalog to page 2
PGM-30-3

030mm Planetary Gear Motor Carbon - Brushed MOT-IG30GM-1:19 Online ID#: PGM-30-12-19-389-03 Our Planetary Gear Motors are an inline solution providing excellent torque output at various speeds. They are best for intermittent duty operation. With endless performance combinations, we have a fully tailored gear motor solution for you. Contact Us for alternative solutions! [email protected] • www.islproducts.com

 Open the catalog to page 3
PGM-30-4

0 30mm Planetary Gear Motor Brushed - w/ Magnetic Encoder MOT-I-81668-19E Online ID#: PGM-30-12-19-790-CE Our Planetary Gear Motors are an inline solution providing excellent torque & speed output. Equiped with an incremental magnetic encoder for optimal positioning. They're best for intermittent duty operation. With endless combinations, we have a fully tailored gear motor solution for you. Contact Us for alternative solutions! Performance Curve © 2024 ISL Products International Ltd. Specifications subject to change without notice. ISL Products International Ltd. • 572 Walt Whitman Rd., Suite...

 Open the catalog to page 4
PGM-30-5

This gear motor is equiped with one of our magnetic encoders to provide exceptional feedback and control. Electrical Characteristics © 2023 ISL Products International Ltd. Specifications subject to change without notice. ISL Products International Ltd. • 572 Walt Whitman Rd., Suite 100 • Melville, NY 11747 • T 516-937-3475 • www.islproducts.com

 Open the catalog to page 5
PGM-30-6

ø30mm Planetary Gear Motor Carbon - Brushed MOT-IG-30GM 1:100 Online ID#: Our Planetary Gear Motors are an inline solution providing excellent torque output at various speeds. They are equiped to handle varying loads and are best for intermittent duty operation. With endless performance combinations, we have a fully tailored gear motor solution for you. Contact Us for alternative solutions! Specifications Gearhead Type: Motor Type: Rated Voltage: Rated Speed: Rated Torque: Rated Current: Planetary Carbon - Brushed 12V DC 63 rpm 7 kg.cm 0.95 A No-Load Speed: No-Load Current: Stall Torque: Max....

 Open the catalog to page 6
PGM-30-7

ø30mm Planetary Gear Motor Carbon - Brushed MOT-IG-30GM 1:189 Online ID#: Our Planetary Gear Motors are an inline solution providing excellent torque output at various speeds. They are equiped to handle varying loads and are best for intermittent duty operation. With endless performance combinations, we have a fully tailored gear motor solution for you. Contact Us for alternative solutions! Specifications Gearhead Type: Motor Type: Rated Voltage: Rated Speed: Rated Torque: Rated Current: Planetary Carbon - Brushed 12V DC 33 rpm 11 kg.cm 0.95 A No-Load Speed: No-Load Current: Stall Torque: Max....

 Open the catalog to page 7
PGM-30-8

030mm Planetary Gear Motor Carbon - Brushed MOT-I-81442-264 Online ID#: PGM-30-12-264-58-C Our Planetary Gear Motors are an inline solution providing excellent torque output at various speeds. They are best for intermittent duty operation. With endless performance combinations, we have a fully tailored gear motor solution for you. Contact Us for alternative solutions! * Gearbox limitations are set at 40 kg.cm, operating past this torque limit may create premature failure. ISL Products International Ltd. • 572 Walt Whitman Rd., Suite 100 • Melville, NY 11747 • T 516-937-3475 • www.islproducts.com...

 Open the catalog to page 8
PGM-30-9

030mm Planetary Gear Motor Carbon - Brushed MOT-IG30GM-19-24V Online ID#: PGM-30-24-19-389-04 Our Planetary Gear Motors are an inline solution providing excellent torque output at various speeds. They are best for intermittent duty operation. With endless performance combinations, we have a fully tailored gear motor solution for you. Contact Us for alternative solutions! [email protected] • www.islproducts.com

 Open the catalog to page 9
PGM-30-10

ø30mm Planetary Gear Motor Carbon - Brushed MOT-I-46008 Online ID#: Our Planetary Gear Motors are an inline solution providing excellent torque output at various speeds. They are equiped to handle varying loads and are best for intermittent duty operation. With endless performance combinations, we have a fully tailored gear motor solution for you. View Alternative Solutions! Specifications Gearhead Type: Motor Type: Rated Voltage: Rated Speed: Rated Torque: Rated Current: Planetary Carbon - Brushed 24V DC 161 rpm 5.3 kg.cm 1A No-Load Speed: No-Load Current: Stall Torque: Max. Power: Reduction...

 Open the catalog to page 10
PGM-30-11

ø30mm Planetary Gear Motor Carbon - Brushed MOT-I-46008-2 Online ID#: Our Planetary Gear Motors are an inline solution providing excellent torque output at various speeds. They are equiped to handle varying loads and are best for intermittent duty operation. With endless performance combinations, we have a fully tailored gear motor solution for you. View Alternative Solutions! Specifications Gearhead Type: Motor Type: Rated Voltage: Rated Speed: Rated Torque: Rated Current: Planetary Carbon - Brushed 24V DC 161 rpm 5.3 kg.cm 1A No-Load Speed: No-Load Current: Stall Torque: Max. Power: Reduction...

 Open the catalog to page 11
PGM-30-12

030mm Planetary Gear Motor Carbon - Brushed MOT-IG30GM-1:71 Online ID#: PGM-30-24-71-104-04 Our Planetary Gear Motors are an inline solution providing excellent torque output at various speeds. They are equiped to handle varying loads and are best for intermittent duty operation. With endless performance combinations, we have a fully tailored gear motor solution for you. Contact Us for alternative solutions! Gearhead Type: No-Load Speed: Motor Type: Carbon - Brushed No-Load Current: Rated Voltage: Stall Torque: Rated Speed: Rated Torque: Reduction Ratio: Rated Current: Termination Style: T:Torqne...

 Open the catalog to page 12

All ISL PRODUCTS INTERNATIONAL catalogs and technical brochures

  1. MOT-DRV-S - Brushed DC Motor Controller
    MOT-DRV-S - Brushed DC Motor Controller

    1  Page

  2. MOT-BL-DRV - BLDC Motor Controllers
    MOT-BL-DRV - BLDC Motor Controllers

    3  Pages

  3. WGM-42
    WGM-42

    6  Pages

  4. UVC Ballasts
    UVC Ballasts

    7  Pages

  5. Piezo Speakers
    Piezo Speakers

    3  Pages

  6. UVC Ballasts
    UVC Ballasts

    6  Pages

  7. PGM-12
    PGM-12

    3  Pages

  8. BLDC-J57
    BLDC-J57

    4  Pages

  9. BLDC-J42
    BLDC-J42

    3  Pages

  10. PGM-32
    PGM-32

    2  Pages

  11. PGMBL-J42
    PGMBL-J42

    3  Pages

  12. WGM-59
    WGM-59

    3  Pages

  13. DC Motor & Gear Motors
    DC Motor & Gear Motors

    6  Pages

  14. ISL Products Product Line
    ISL Products Product Line

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.