Control Center System SThe SCU 810 device can be implemented anywhere where the basic function of a communication gateway is needed and/or integration of lEDs is required. The typical ■ Central communication device in HV and tomation Systems ■ The communication interface in either a control or maintenance center ■ Integration of lEDs into substation or central SCADA systems ■ Communication gateway for Protection ■ Protocol conversion in all communication ■ Basic communication node to communi- cation between lEDs and control centers ■ Support of backup communication paths ■ Support of communication protocols supported by different manufacturers ■ Remote control, monitoring and configu- ■ Support of internal and external GPS or DCF clock or over NTP time synchroniza- ■ Non-volatile memory (for drives, applica- ■ Integrated diagnostic software SCU 810 can also interconnect devices with serial optical and electrical ports. Depending on application, number of ports may exceed the port capacity of the unit. In that case tion Unit) are used to increase the number of serial ports. In that way up to 64 serial ports can be implemented with single SCU Control Center System THE FAMILY OF EQUIPMENT DEDICATED FOR POWER UTILITIES Published by Iskra Sistemi, d. d. . Version 2.0, October 2012 Iskra Sistemi

The supply of electrical energy occupies an important position in the life of modern society. Operation of commerce, industry, transport, health service and private household are all dependent on regular and dependable supply of electrical energy. The quality of supplied electrical energy also depends on information about the state of power system. A successful power system operation therefore requires the use of state-of-the-art secondary equipment, which enables protection, monitoring, supervision and control of individual devices as well as whole power system. Tradition, Know-how and Modern...